replace broken links armv7-rtems-eabihf.md
Hi team , i found broken link in `src/doc/rustc/src/platform-support/armv7-rtems-eabihf.md` and replace
thanks
Make target maintainers more easily pingable
Put them all on the same line with just their GitHub handles to make it very easy to copy and paste (with ctrl-shift-v!!!) the names.
We have no use for email, so I removed all the emails, we don't care about people's full names either.
This is a pretty big PR with lots of changes. I may have gotten one or two wrong, who knows. I went over it fairly aggressively, removing all information I deemed unnecessary.
> [!Caution]
> When copying these usernames, use **ctrl-shift-v** to avoid pasting them as links
r? RalfJung you indirectly asked for this :) (anyone is welcome to review)
Add target-specific NaN payloads for the missing tier 2 targets
This PR adds target-specific NaN payloads for the remaining tier 2 targets:
- `arm64ec`: This target is a mix of `x86_64` and `aarch64`, meaning as they both have no extra payloads `arm64ec` also has no extra payloads.
- `loongarch64`: Per [LoongArch Reference Manual - Volume 1: Basic Architecture](https://github.com/loongson/LoongArch-Documentation/releases/download/2023.04.20/LoongArch-Vol1-v1.10-EN.pdf) section 3.1.1.3, LoongArch does quieting NaN propagation with the Rust preferred NaN as its default NaN, meaning it has no extra payloads.
- `nvptx64`: Per [PTX ISA documentation](https://docs.nvidia.com/cuda/parallel-thread-execution/index.html#floating-point-instructions) section 9.7.3 (and section 9.7.4 for `f16`), all payloads are possible. The documentation explicitly states that `f16` and `f32` operations result in an unspecified NaN payload, while for `f64` it states "NaN payloads are supported" without specifying how or what payload will be generated if there are no input NaNs.
- `powerpc` and `powerpc64`: Per [Power Instruction Set Architecture](https://files.openpower.foundation/s/9izgC5Rogi5Ywmm/download/OPF_PowerISA_v3.1C.pdf) Book I section 4.3.2, PowerPC does quieting NaN propagation with the Rust preferred NaN being generated if no there are no input NaNs, meaning it has no extra payloads.
- `s390x`: Per [IBM z/Architecture Principles of Operation](https://www.vm.ibm.com/library/other/22783213.pdf#page=965) page 9-3, s390x does quieting NaN propagation with the Rust's preferred NaN as its default NaN, meaning it has no extra payloads.
Tracking issue: #128288
cc ``@RalfJung``
``@rustbot`` label +T-lang
Also cc relevant target maintainers of tier 2 targets:
- `arm64ec`: ``@dpaoliello``
- `loongarch64`: ``@heiher`` ``@xiangzhai`` ``@zhaixiaojuan`` ``@xen0n``
- `nvptx64`: ``@RDambrosio016`` ``@kjetilkjeka``
- `powerpc`: the only documented maintainer is ``@BKPepe`` for the tier 3 `powerpc-unknown-linux-muslspe`.
- `powerpc64`: ``@daltenty`` ``@gilamn5tr`` ``@Gelbpunkt`` ``@famfo`` ``@neuschaefer``
- `s390x`: ``@uweigand`` ``@cuviper``
Put them all on the same line with just their GitHub handles to make it
very easy to copy and paste (with ctrl-shift-v!!!) the names.
We have no use for email, so I removed all the emails, we don't care
about people's full names either.
Co-authored-by: Thalia Archibald <thalia@archibald.dev>
Switch exploit mitigations to mdbook footnotes
This updates the exploit mitigations chapter in the rustc book to use the footnote feature of mdbook instead of manually implementing footnotes with HTML.
transmutability: remove NFA intermediate representation
Prior to this commit, the transmutability analysis used an intermediate NFA representation of type layout. We then determinized this representation into a DFA, upon which we ran the core transmutability analysis. Unfortunately, determinizing NFAs is expensive. In this commit, we avoid NFAs entirely by observing that Rust `union`s are the only source of nondeterminism and that it is comparatively cheap to compute the DFA union of DFAs.
We also implement Graphviz DOT debug formatting of DFAs.
Fixesrust-lang/project-safe-transmute#23Fixesrust-lang/project-safe-transmute#24
r? ``@compiler-errors``
simd intrinsics with mask: accept unsigned integer masks, and fix some of the errors
It's not clear at all why the mask would have to be signed, it is anyway interpreted bitwise. The backend should just make sure that works no matter the surface-level type; our LLVM backend already does this correctly. The note of "the mask may be widened, which only has the correct behavior for signed integers" explains... nothing? Why can't the code do the widening correctly? If necessary, just cast to the signed type first...
Also while we are at it, fix the errors. For simd_masked_load/store, the errors talked about the "third argument" but they meant the first argument (the mask is the first argument there). They also used the wrong type for `expected_element`.
I have extremely low confidence in the GCC part of this PR.
See [discussion on Zulip](https://rust-lang.zulipchat.com/#narrow/channel/257879-project-portable-simd/topic/On.20the.20sign.20of.20masks)
Prior to this commit, the transmutability analysis used an intermediate
NFA representation of type layout. We then determinized this
representation into a DFA, upon which we ran the core transmutability
analysis. Unfortunately, determinizing NFAs is expensive. In this
commit, we avoid NFAs entirely by observing that Rust `union`s are the
only source of nondeterminism and that it is comparatively cheap to
compute the DFA union of DFAs.
We also implement Graphviz DOT debug formatting of DFAs.
Fixesrust-lang/project-safe-transmute#23Fixesrust-lang/project-safe-transmute#24
Remove early exits from JumpThreading.
This removes early exits from https://github.com/rust-lang/rust/pull/131203 as I asked during review.
The correctness of the backtracking is `mutated_statement` clearing all relevant conditions. If `process_statement` fails to insert a new condition, for instance by const-eval failure, `mutated_statement` still removes the obsolete conditions from the state.
r? `@compiler-errors`
Improve `clean_maybe_renamed_item` function code a bit
Follow-up of #139846.
This is what I tried to say in there: the `name` variable can be unwrapped in most cases so better do it directly once and for all if possible and move the cases where it's not possible above.
r? `@nnethercote`
skip llvm-config in autodiff check builds, when its unavailable
As you suggested, this indeed fixes `./x.py check` builds when autodiff is enabled.
r? ```@onur-ozkan```
closes#139936
Tracking:
- https://github.com/rust-lang/rust/issues/124509
Setup editor file associations for non-rs extensions
.gitattributes lists `*.fixed`, `*.pp`, and `*.mir` as file extensions which should be treated as Rust source code. Do the same for VS Code and Zed. This only does syntax highlighting, which is appropriate, as MIR isn't really Rust code.
At the same time, consistently order `rust-analyzer.linkedProjects` between editors. For some reason, Eglot didn't include `library/Cargo.toml`.
I have tested this with VS Code and Zed. I have not implemented it for Emacs/Eglot or Helix.
add next_index to Enumerate
Proposal: https://github.com/rust-lang/libs-team/issues/435
Tracking Issue: #130711
This basically just reopens#130682 but squashed and with the new function and the feature gate renamed to `next_index.`
There are two questions I have already:
- Shouldn't we add test coverage for that? I'm happy to provide some, but I might need a pointer to where these test would be.
- Maybe I could actually also add a doctest?
- For now, I just renamed the feature name in the unstable attribute to `next_index`, as well, so it matches the new name of the function. Is that okay? And can I just do that and use any string, or is there a sealed list of features defined somewhere where I also need to change the name?
Do not remove trivial `SwitchInt` in analysis MIR
This PR ensures that we don't prematurely remove trivial `SwitchInt` terminators which affects both the borrow-checking and runtime semantics (i.e. UB) of the code. Previously the `SimplifyCfg` optimization was removing `SwitchInt` terminators when they was "trivial", i.e. when all arms branched to the same basic block, even if that `SwitchInt` terminator had the side-effect of reading an operand which (for example) may not be initialized or may point to an invalid place in memory.
This behavior is unlike all other optimizations, which are only applied after "analysis" (i.e. borrow-checking) is finished, and which Miri disables to make sure the compiler doesn't silently remove UB.
Fixing this code "breaks" (i.e. unmasks) code that used to borrow-check but no longer does, like:
```rust
fn foo() {
let x;
let (0 | _) = x;
}
```
This match expression should perform a read because `_` does not shadow the `0` literal pattern, and the compiler should have to read the match scrutinee to compare it to 0. I've checked that this behavior does not actually manifest in practice via a crater run which came back clean: https://github.com/rust-lang/rust/pull/139042#issuecomment-2767436367
As a side-note, it may be tempting to suggest that this is actually a good thing or that we should preserve this behavior. If we wanted to make this work (i.e. trivially optimize out reads from matches that are redundant like `0 | _`), then we should be enabling this behavior *after* fixing this. However, I think it's kinda unprincipled, and for example other variations of the code don't even work today, e.g.:
```rust
fn foo() {
let x;
let (0.. | _) = x;
}
```
This updates the exploit mitigations chapter in the rustc book to use
the footnote feature of mdbook instead of manually implementing
footnotes with HTML.
Clean UI tests 4 of n
Cleaned up some tests that have `issue` in the title. I kept the commits to be one per "`issue`" cleanup/rename to make it easier to check. I can rebase to one commit once the changes are approved.
Related Issues:
#73494#133895
r? jieyouxu
Add citool command for generating a test dashboard
This PR implements an initial version of a test suite dashboard, which shows which tests were executed on CI and which tests were ignored. This was discussed [here](https://rust-lang.zulipchat.com/#narrow/channel/238009-t-compiler.2Fmeetings/topic/.5Bsteering.5D.202025-04-11.20Dealing.20with.20disabled.20tests/with/512799036). The dashboard is still quite bare-bones, but I think that it could already be useful.
The next step is to create a job index, similarly to the post-merge report, and link from the individual tests to the job that executed them.
You can try it locally like this:
```bash
$ cargo run --manifest-path src/ci/citool/Cargo.toml --release \
-- test-dashboard 38c560ae68 --output-dir dashboard
```
and then open `dashboard/index.html` in a web browser.
CC ````@wesleywiser````
r? ````@jieyouxu````
Move `pal::env` to `std::sys::env_consts`
Combine the `std::env::consts` platform implementations as a single file. Use the Unix file as the base, since it has 28 entries, and fold the 8 singleton platforms into it. The Unix file was roughly grouped into Linux, Apple, BSD, and everything else, roughly in alphabetical order. Alphabetically order them to make it easier to maintain and discard the Unix-specific groups to generalize it to all platforms.
I'd prefer to have no fallback implementation, as I consider it a bug; however TEEOS, Trusty, and Xous have no definitions here. Since they otherwise have `pal` abstractions, that indicates that there are several platforms without `pal` abstractions which are also missing here. To support unsupported, create a little macro to handle the fallback case and not introduce ordering between the `cfg`s like `cfg_if!`.
I've named the module `std::sys::env_consts`, because they are used in `std::env::consts` and I intend to use the name `std::sys::env` for the combination of `Args` and `Vars`.
cc `@joboet` `@ChrisDenton`
Tracked in #117276.
Don't canonicalize crate paths
When printing paths in diagnostic we should favour printing the paths that were passed in rather than resolving all symlinks.
This PR changes the form of the crate path but it should only really affect diagnostics as filesystem functions won't care which path is used. The uncanonicalized path was already used as a fallback for when canonicalization failed.
This is a partial alternative to #139823.
Don't assemble non-env/bound candidates if projection is rigid
Putting this up for an initial review, it's still missing comments, clean-up, and possibly a tweak to deal with ambiguities in the `BestObligation` folder.
This PR fixes https://github.com/rust-lang/trait-system-refactor-initiative/issues/173. Specifically, we're creating an unnecessary query cycle in normalization by assembling an *impl candidate* even if we know later on during `merge_candidates` that we'll be filtering out that impl candidate.
This PR adjusts the `merge_candidates` to assemble *only* env/bound candidates if we have `TraitGoalProvenVia::ParamEnv | TraitGoalProvenVia::AliasBound`.
I'll leave some thoughts/comments in the code.
r? lcnr
Rewrite on_unimplemented format string parser.
This PR rewrites the format string parser for `rustc_on_unimplemented` and `diagnostic::on_unimplemented`. I plan on moving this code (and more) into the new attribute parsing system soon and wanted to PR it separately.
This PR introduces some minor differences though:
- `rustc_on_unimplemented` on trait *implementations* is no longer checked/used - this is actually never used (outside of some tests) so I plan on removing it in the future.
- for `rustc_on_unimplemented`, it introduces the `{This}` argument in favor of `{ThisTraitname}` (to be removed later). It'll be easier to parse.
- for `rustc_on_unimplemented`, `Self` can now consistently be used as a filter, rather than just `_Self`. It used to not match correctly on for example `Self = "[{integer}]"`
- Some error messages now have better spans.
Fixes https://github.com/rust-lang/rust/issues/130627
support config extensions
_Copied from the `rustc-dev-guide` addition:_
>When working on different tasks, you might need to switch between different bootstrap >configurations.
>Sometimes you may want to keep an old configuration for future use. But saving raw config >values in
>random files and manually copying and pasting them can quickly become messy, especially if >you have a
>long history of different configurations.
>
>To simplify managing multiple configurations, you can create config extensions.
>
>For example, you can create a simple config file named `cross.toml`:
>
>```toml
>[build]
>build = "x86_64-unknown-linux-gnu"
>host = ["i686-unknown-linux-gnu"]
>target = ["i686-unknown-linux-gnu"]
>
>
>[llvm]
>download-ci-llvm = false
>
>[target.x86_64-unknown-linux-gnu]
>llvm-config = "/path/to/llvm-19/bin/llvm-config"
>```
>
>Then, include this in your `bootstrap.toml`:
>
>```toml
>include = ["cross.toml"]
>```
>
>You can also include extensions within extensions recursively.
>
>**Note:** In the `include` field, the overriding logic follows a right-to-left order. For example,
in `include = ["a.toml", "b.toml"]`, extension `b.toml` overrides `a.toml`. Also, parent extensions
always overrides the inner ones.
try-job: x86_64-mingw-2
Re-remove `AdtFlags::IS_ANONYMOUS`
Removed in #138296.
I accidentally re-added it in #137043 while resolving merge conflicts. This PR re-removes it.
r? ``@compiler-errors`` (sorry)
