Rollup of 7 pull requests
Successful merges:
- #132782 (improvements on initial sysroot and libdir finding logics)
- #133466 (Fix typos in pin.rs)
- #133492 (bootstrap: allow skipping steps with start of path)
- #133501 (support revealing defined opaque post borrowck)
- #133530 (Use consistent wording in docs, use is zero instead of is 0)
- #133538 (Better diagnostic for fn items in variadic functions)
- #133590 (Rename `-Zparse-only`)
r? `@ghost`
`@rustbot` modify labels: rollup
Use consistent wording in docs, use is zero instead of is 0
In documentation, wording of _"`rhs` is zero"_ and _"`rhs` is 0"_ is intermixed. This is especially visible [here](https://doc.rust-lang.org/std/primitive.usize.html#method.div_ceil).
This changes all occurrences to _"`rhs` is zero"_ for better readability.
support revealing defined opaque post borrowck
By adding a new `TypingMode::PostBorrowckAnalysis`. Currently only supported with the new solver and I didn't look into the way we replace `ReErased`. ``@compiler-errors`` mentioned that always using existentials may be unsound.
r? ``@compiler-errors``
improvements on initial sysroot and libdir finding logics
Stabilized initial sysroot and libdir path resolution logic to work without dry-run conditions and utilized initial sysroot more broadly.
Remove `HybridBitSet`
`HybridBitSet` was introduced under the name `HybridIdxSetBuf` way back in #53383 where it was a big win for NLL borrow checker performance. In #93984 the more flexible `ChunkedBitSet` was added. Uses of `HybridBitSet` have gradually disappeared (e.g. #116152) and there are now few enough that they can be replaced with `BitSet` or `ChunkedBitSet`, and `HybridBitSet` can be removed, cutting more than 700 lines of code.
r? `@Mark-Simulacrum`
As part of the larger goal of reducing `HybridBitSet` use in general.
This code is for debugging only and isn't performance sensitive, so
`ChunkedBitSet` should be fine.
The current implementation is slow because it does an operation for
every bit in the set, even zero bits. So if you have a large bitset with
many zero bits (which is common) it's very slow.
This commit improves the iterator to skip over `Zeros` chunks in a
single step, and uses the fast `BitIter` for `Mixed` chunks. It also
removes the existing `fold` implementation, which was only there because
the old iterator was slow.
- Fix a typo in a comment.
- Remove unnecessary `Chunk::` qualifiers.
- Rename `ChunkedBitIter::bitset` as `ChunkedBitIter::bit_set`, because
`bit_set` is the form used everywhere else.
- Avoid some unnecessary local variables.
`ChunkedBitSet::is_empty` currently does an unnecessary check. This
commit removes that check and adds clarifying comments and an assertion
that demonstrate why it's unnecessary.
Revert #133418 (Store coverage source regions as `Span`) due to regression #133606
This reverts commit adf9b5fcd1, reversing changes made to af1ca153d4.
Reverting #133418 due to regressions reported at #133606.
r? jieyouxu
ensure JSON-defined targets are consistent
We have a `check_consistency` check that ensures some invariants which (presumably) the rest of the compiler relies on. However, JSON targets can easily be written in a way that violates those invariants. So this PR applies the same consistency check to JSON targets that we already enforce for built-in targets.
I have converted many of the assertions in that function to new macros that show a nice error instead of a panic; if people are okay with the general approach here, I can do that for the rest of the checks as well.
Enable -Zshare-generics for inline(never) functions
This avoids inlining cross-crate generic items when possible that are
already marked inline(never), implying that the author is not intending
for the function to be inlined by callers. As such, having a local copy
may make it easier for LLVM to optimize but mostly just adds to binary
bloat and codegen time. In practice our benchmarks indicate this is
indeed a win for larger compilations, where the extra cost in dynamic
linking to these symbols is diminished compared to the advantages in
fewer copies that need optimizing in each binary.
It might also make sense it expand this with other heuristics (e.g.,
`#[cold]`) in the future, but this seems like a good starting point.
FWIW, I expect that doing cleanup in where we make the decision
what should/shouldn't be shared is also a good idea. Way too
much code needed to be tweaked to check this. But I'm hoping
to leave that for a follow-up PR rather than blocking this on it.
I was surprised to find that running with `-Zparse-only` only parses the
crate root file. Other files aren't parsed because that happens later
during expansion.
This commit renames the option and updates the help message to make this
clearer.
Compiletest: add proc-macro header
This adds a `proc-macro` header to simplify using proc-macros, and to reduce boilerplate. This header works similar to the `aux-build` header where you pass a path for a proc-macro to be built.
This allows the `force-host`, `no-prefer-dynamic` headers, and `crate_type` attribute to be removed. Additionally it uses `--extern` like `aux_crate` (allows implicit `extern crate` in 2018) and `--extern proc_macro` (to place in the prelude in 2018).
~~This also includes a secondary change which defaults the edition of proc-macros to 2024. This further reduces boilerplate (removing `extern crate proc_macro;`), and allows using modern Rust syntax. I was a little on the fence including this. I personally prefer it, but I can imagine it might be confusing to others.~~ EDIT: Removed
Some tests were changed so that when there is a chain of dependencies A→B→C, that the `@ proc-macro` is placed in `B` instead of `A` so that the `--extern` flag works correctly (previously it depended on `-L` to find `C`). I think this is better to make the dependencies more explicit. None of these tests looked like the were actually testing this behavior.
There is one test that had an unexplained output change: `tests/ui/macros/same-sequence-span.rs`. I do not know why it changed, but it didn't look like it was particularly important. Perhaps there was a normalization issue?
This is currently not compatible with the rustdoc `build-aux-docs` header. It can probably be fixed, I'm just not feeling motivated to do that right now.
### Implementation steps
- [x] Document this new behavior in rustc-dev-guide once we figure out the specifics. https://github.com/rust-lang/rustc-dev-guide/pull/2149
This reduces code sizes and better respects programmer intent when
marking inline(never). Previously such a marking was essentially ignored
for generic functions, as we'd still inline them in remote crates.
always create `DefId`s for anon consts
but don't use them anywhere, we intentionally don't encode them in the crate metadata.
best reviewed by disabling whitespace.
This pretty much reimplements #133285 while adding the tests of #133455. Fixes#133064
r? `@BoxyUwU` `@compiler-errors`
Rollup of 7 pull requests
Successful merges:
- #133358 (Don't type error if we fail to coerce `Pin<T>` because it doesnt contain a ref)
- #133422 (Fix clobber_abi in RV32E and RV64E inline assembly)
- #133452 (Support predicate registers (clobber-only) in Hexagon inline assembly)
- #133463 (Fix handling of x18 in AArch64 inline assembly on ohos/trusty or with -Zfixed-x18)
- #133487 (fix confusing diagnostic for reserved `##`)
- #133557 (Small doc fixes in `rustc_codegen_ssa`)
- #133560 (Trim extra space in 'repeated `mut`' diagnostic)
r? `@ghost`
`@rustbot` modify labels: rollup
Small doc fixes in `rustc_codegen_ssa`
I'm trying to make a toy codegen backend for `rustc`, and I got confused for a few minutes about what `codegen_backend` was referring to in the `CodegenBackend::join_codegen` docs.
Experimentally, it looks like the result of `CodegenBackend::codegen_crate` is passed to `CodegenBackend::join_codegen`, so this updates the docs to refer to that. This time using intra-doc links to hopefully cause people to notice if that gets out of date again.
Also, added another intra-doc link nearby, on `CodegenBackend::link`, for the same reason.
Fix clobber_abi in RV32E and RV64E inline assembly
Currently clobber_abi in RV32E and RV64E inline assembly is implemented using InlineAsmClobberAbi::RiscV, but broken since x16-x31 cannot be used in RV32E and RV64E.
```
error: cannot use register `x16`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x17`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x28`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x29`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x30`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
error: cannot use register `x31`: register can't be used with the `e` target feature
--> <source>:42:14
|
42 | asm!("", clobber_abi("C"), options(nostack, nomem, preserves_flags));
| ^^^^^^^^^^^^^^^^
```
r? `@Amanieu`
`@rustbot` label O-riscv +A-inline-assembly
Don't type error if we fail to coerce `Pin<T>` because it doesnt contain a ref
Fixes https://github.com/rust-lang/rust/issues/133222. Also moves some tests into a directory for better bookkeeping.
r? eholk or re-roll
