Inject `compiler_builtins` during postprocessing and ensure it is made private
Follow up of https://github.com/rust-lang/rust/pull/135278
Do the following:
* Inject `compiler_builtins` during postprocessing, rather than injecting `extern crate compiler_builtins as _` into the AST
* Do not make dependencies of `std` private by default (this was added in #135278)
* Make sure sysroot crates correctly mark their dependencies private/public
* Ensure that marking a dependency private makes its dependents private by default as well, unless otherwise specified
* Do the `compiler_builtins` update that has been blocked on this
There is more detail in the commit messages. This includes the changes I was working on in https://github.com/rust-lang/rust/pull/136226.
try-job: test-various
try-job: x86_64-msvc-1
try-job: x86_64-msvc-2
try-job: i686-mingw-1
try-job: i686-mingw-2
`compiler_builtins` is currently injected as `extern crate
compiler_builtins as _`. This has made gating via diagnostics difficult
because it appears in the crate graph as a non-private dependency, and
there isn't an easy way to differentiate between the injected AST and
user-specified `extern crate compiler_builtins`.
Resolve this by injecting `compiler_builtins` during postprocessing
rather than early in the AST. Most of the time this isn't even needed
because it shows up in `std` or `core`'s crate graph, but injection is
still needed to ensure `#![no_core]` works correctly.
A similar change was attempted at [1] but this encountered errors
building `proc_macro` and `rustc-std-workspace-std`. Similar failures
showed up while working on this patch, which were traced back to
`compiler_builtins` showing up in the graph twice (once via dependency
and once via injection). This is resolved by not injecting if a
`#![compiler_builtins]` crate already exists.
[1]: https://github.com/rust-lang/rust/pull/113634
Add a TyPat in the AST to reuse the generic arg lowering logic
This simplifies ast lowering significantly with little cost to the pattern types parser.
Also fixes any problems we've had with generic args (well, pushes any problems onto the `generic_const_exprs` feature gate)
follow-up to https://github.com/rust-lang/rust/pull/136284#discussion_r1939292367
r? ``@BoxyUwU``
Introduce CoercePointeeWellformed for coherence checks at typeck stage
Fix#135206
This is the first PR to introduce the "wellformedness" check for `derive(CoercePointee)`.
This patch introduces a new error code to cover all the prerequisites of the said macro. The checks that is enforced with this patch is whether the data is indeed `struct` and whether the layout is set to `repr(transparent)`.
A following series of patch will arrive later to address the following concern.
1. #135217 so that we would only admit one single coercion on one type parameter, and leave the rest for future consideration in tandem of development of other coercion rules.
1. Enforcement of data field requirements.
**An open question** is whether there is a good schema to encode the `#[pointee]` as well, so that we could also check if the `#[pointee]` type parameter is indeed `?Sized`.
``@rustbot`` label F-derive_coerce_pointee
tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
tree-wide: parallel: Fully removed all `Lrc`, replaced with `Arc`
This is continuation of https://github.com/rust-lang/rust/pull/132282 .
I'm pretty sure I did everything right. In particular, I searched all occurrences of `Lrc` in submodules and made sure that they don't need replacement.
There are other possibilities, through.
We can define `enum Lrc<T> { Rc(Rc<T>), Arc(Arc<T>) }`. Or we can make `Lrc` a union and on every clone we can read from special thread-local variable. Or we can add a generic parameter to `Lrc` and, yes, this parameter will be everywhere across all codebase.
So, if you think we should take some alternative approach, then don't merge this PR. But if it is decided to stick with `Arc`, then, please, merge.
cc "Parallel Rustc Front-end" ( https://github.com/rust-lang/rust/issues/113349 )
r? SparrowLii
`@rustbot` label WG-compiler-parallel
This has now been approved as a language feature and no longer needs
a `rustc_` prefix.
Also change the `contracts` feature to be marked as incomplete and
`contracts_internals` as internal.
Instead of parsing the different components of a function signature,
eagerly look for either the `where` keyword or the function body.
- Also address feedback to use `From` instead of `TryFrom` in cranelift
contract and ubcheck codegen.
The extended syntax for function signature that includes contract clauses
should never be user exposed versus the interface we want to ship
externally eventually.
includes post-developed commit: do not suggest internal-only keywords as corrections to parse failures.
includes post-developed commit: removed tabs that creeped in into rustfmt tool source code.
includes post-developed commit, placating rustfmt self dogfooding.
includes post-developed commit: add backquotes to prevent markdown checking from trying to treat an attr as a markdown hyperlink/
includes post-developed commit: fix lowering to keep contracts from being erroneously inherited by nested bodies (like closures).
Rebase Conflicts:
- compiler/rustc_parse/src/parser/diagnostics.rs
- compiler/rustc_parse/src/parser/item.rs
- compiler/rustc_span/src/hygiene.rs
Remove contracts keywords from diagnostic messages
Provide a new function `listify`, meant to be used in cases similar to `pluralize!`. When you have a slice of arbitrary elements that need to be presented to the user, `listify` allows you to turn that into a list of comma separated strings.
This reduces a lot of redundant logic that happens often in diagnostics.
Point at invalid utf-8 span on user's source code
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: byte `193` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
```
error: couldn't read `$DIR/not-utf8-bin-file.rs`: stream did not contain valid UTF-8
--> $DIR/not-utf8-2.rs:6:5
|
LL | include!("not-utf8-bin-file.rs");
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: `[193]` is not valid utf-8
--> $DIR/not-utf8-bin-file.rs:2:14
|
LL | let _ = "�|�␂!5�cc␕␂��";
| ^
= note: this error originates in the macro `include` (in Nightly builds, run with -Z macro-backtrace for more info)
```
When we attempt to load a Rust source code file, if there is a OS file failure we try reading the file as bytes. If that succeeds we try to turn it into UTF-8. If *that* fails, we provide additional context about *where* the file has the first invalid UTF-8 character.
Fix#76869.
Use orphaned error code for the same error it belonged to before.
```
error[E0665]: `#[derive(Default)]` on enum with no `#[default]`
--> $DIR/macros-nonfatal-errors.rs:42:10
|
LL | #[derive(Default)]
| ^^^^^^^
LL | / enum NoDeclaredDefault {
LL | | Foo,
LL | | Bar,
LL | | }
| |_- this enum needs a unit variant marked with `#[default]`
|
= note: this error originates in the derive macro `Default` (in Nightly builds, run with -Z macro-backtrace for more info)
help: make this unit variant default by placing `#[default]` on it
|
LL | #[default] Foo,
| ~~~~~~~~~~~~~~
help: make this unit variant default by placing `#[default]` on it
|
LL | #[default] Bar,
| ~~~~~~~~~~~~~~
```
The parser pushes a `TokenType` to `Parser::expected_token_types` on
every call to the various `check`/`eat` methods, and clears it on every
call to `bump`. Some of those `TokenType` values are full tokens that
require cloning and dropping. This is a *lot* of work for something
that is only used in error messages and it accounts for a significant
fraction of parsing execution time.
This commit overhauls `TokenType` so that `Parser::expected_token_types`
can be implemented as a bitset. This requires changing `TokenType` to a
C-style parameterless enum, and adding `TokenTypeSet` which uses a
`u128` for the bits. (The new `TokenType` has 105 variants.)
The new types `ExpTokenPair` and `ExpKeywordPair` are now arguments to
the `check`/`eat` methods. This is for maximum speed. The elements in
the pairs are always statically known; e.g. a
`token::BinOp(token::Star)` is always paired with a `TokenType::Star`.
So we now compute `TokenType`s in advance and pass them in to
`check`/`eat` rather than the current approach of constructing them on
insertion into `expected_token_types`.
Values of these pair types can be produced by the new `exp!` macro,
which is used at every `check`/`eat` call site. The macro is for
convenience, allowing any pair to be generated from a single identifier.
The ident/keyword filtering in `expected_one_of_not_found` is no longer
necessary. It was there to account for some sloppiness in
`TokenKind`/`TokenType` comparisons.
The existing `TokenType` is moved to a new file `token_type.rs`, and all
its new infrastructure is added to that file. There is more boilerplate
code than I would like, but I can't see how to make it shorter.
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
Because `TokenStreamIter` is a much better name for a `TokenStream`
iterator. Also rename the `TokenStream::trees` method as
`TokenStream::iter`, and some local variables.
Add AST support for unsafe binders
I'm splitting up #130514 into pieces. It's impossible for me to keep up with a huge PR like that. I'll land type system support for this next, probably w/o MIR lowering, which will come later.
r? `@oli-obk`
cc `@BoxyUwU` and `@lcnr` who also may want to look at this, though this PR doesn't do too much yet
When we expand a `mod foo;` and parse `foo.rs`, we now track whether that file had an unrecovered parse error that reached the end of the file. If so, we keep that information around. When resolving a path like `foo::bar`, we do not emit any errors for "`bar` not found in `foo`", as we know that the parse error might have caused `bar` to not be parsed and accounted for.
When this happens in an existing project, every path referencing `foo` would be an irrelevant compile error. Instead, we now skip emitting anything until `foo.rs` is fixed. Tellingly enough, we didn't have any test for errors caused by `mod` expansion.
Fix#97734.
