`rustc_symbol` is the source of truth for keywords.
rustdoc has its own implicit definition of keywords, via the
`is_doc_keyword`. It (presumably) intends to include all keywords, but
it omits `yeet`.
rustfmt has its own explicit list of Rust keywords. It also (presumably)
intends to include all keywords, but it omits `await`, `builtin`, `gen`,
`macro_rules`, `raw`, `reuse`, `safe`, and `yeet`. Also, it does linear
searches through this list, which is inefficient.
This commit fixes all of the above problems by introducing a new
predicate `is_any_keyword` in rustc and using it in rustdoc and rustfmt.
It documents that it's not the right predicate in most cases.
This commit seeks to stabilize the `#[diagnostic::do_not_recommend]`
attribute.
This attribute was first proposed as `#[do_not_recommend`] attribute in
RFC 2397 (https://github.com/rust-lang/rfcs/pull/2397). It gives the
crate authors the ability to not suggest to the compiler to not show
certain traits in it's error messages. With the presence of the
`#[diagnostic]` tool attribute namespace it was decided to move the
attribute there, as that lowers the amount of guarantees the compiler
needs to give about the exact way this influences error messages. It
turns the attribute into a hint which can be ignored. In addition to the
original proposed functionality this attribute now also hides the marked
trait in help messages ("This trait is implemented by: ").
The attribute does not accept any argument and can only be placed on
trait implementations. If it is placed somewhere else a lint warning is
emitted and the attribute is otherwise ignored. If an argument is
detected a lint warning is emitted and the argument is ignored. This
follows the rules outlined by the diagnostic namespace.
This attribute allows crates like diesel to improve their error messages
drastically. The most common example here is the following error
message:
```
error[E0277]: the trait bound `&str: Expression` is not satisfied
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:53:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `Expression` is not implemented for `&str`, which is required by `&str: AsExpression<Integer>`
|
= help: the following other types implement trait `Expression`:
Bound<T>
SelectInt
note: required for `&str` to implement `AsExpression<Integer>`
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:26:13
|
LL | impl<T, ST> AsExpression<ST> for T
| ^^^^^^^^^^^^^^^^ ^
LL | where
LL | T: Expression<SqlType = ST>,
| ------------------------ unsatisfied trait bound introduced here
```
By applying the new attribute to the wild card trait implementation of
`AsExpression` for `T: Expression` the error message becomes:
```
error[E0277]: the trait bound `&str: AsExpression<Integer>` is not satisfied
--> $DIR/as_expression.rs:55:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `AsExpression<Integer>` is not implemented for `&str`
|
= help: the trait `AsExpression<Text>` is implemented for `&str`
= help: for that trait implementation, expected `Text`, found `Integer`
```
which makes it much easier for users to understand that they are facing
a type mismatch.
Other explored example usages included
* This standard library error message: https://github.com/rust-lang/rust/pull/128008
* That bevy derived example:
e1f3068995/tests/ui/diagnostic_namespace/do_not_recommend/supress_suggestions_in_help.rs (No
more tuple pyramids)
Fixes#51992
This PR aims to improve the testing coverage for
`#[diagnostic::do_not_recommend]`. It ensures that all tests are run for
the old and new solver to verify that the behaviour is the same for both
variants. It also adds two new tests:
* A test with 4 traits having wild card impl for each other, with
alternating `#[diagnostic::do_not_recommend]` attributse
* A test with a lifetime dependend wild card impl, which is something
that's not supported yet
Update cargo
6 commits in 769f622e12db0001431d8ae36d1093fb8727c5d9..99dff6d77db779716dda9ca3b29c26addd02c1be
2024-12-14 04:27:35 +0000 to 2024-12-18 00:55:17 +0000
- fix(build-std): make Resolve align to what to build (rust-lang/cargo#14938)
- test(build-std): Isolate output test to avoid spurious `[BLOCKING]` messages from concurrent runs (rust-lang/cargo#14943)
- docs: fix wrong changelog PR link (rust-lang/cargo#14947)
- docs(unstable): Correct stabilization version for MSRV-resolver (rust-lang/cargo#14945)
- Update release information for home 0.5.11 (rust-lang/cargo#14939)
- Limit release trigger to 0.* tags (rust-lang/cargo#14940)
Re-export more `rustc_span::symbol` things from `rustc_span`.
`rustc_span::symbol` defines some things that are re-exported from `rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some closely related things such as `Ident` and `kw`. So you can do `use rustc_span::{Symbol, sym}` but you have to do `use rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`, and changes many `rustc_span::symbol::` qualifiers to `rustc_span::`. This is a 300+ net line of code reduction, mostly because many files with two `use rustc_span` items can be reduced to one.
r? `@jieyouxu`
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
- Move it to `rustc_parse`, which is the only crate that uses it. This
lets us remove all the `pub` markers from it.
- Change `next_ref` and `look_ahead` to `get` and `bump`, which work
better for the `rustc_parse` uses.
- This requires adding a `TokenStream::get` method, which is simple.
- In `TokenCursor`, we currently duplicate the
`DelimSpan`/`DelimSpacing`/`Delimiter` from the surrounding
`TokenTree::Delimited` in the stack. This isn't necessary so long as
we don't prematurely move past the `Delimited`, and is a small perf
win on a very hot code path.
- In `parse_token_tree`, we clone the relevant `TokenTree::Delimited`
instead of constructing an identical one from pieces.
Rollup of 7 pull requests
Successful merges:
- #133265 (Add a range argument to vec.extract_if)
- #133801 (Promote powerpc64le-unknown-linux-musl to tier 2 with host tools)
- #134323 (coverage: Dismantle `map_data.rs` by moving its responsibilities elsewhere)
- #134378 (An octuple of polonius fact generation cleanups)
- #134408 (Regression test for RPIT inheriting lifetime from projection)
- #134423 (bootstrap: use specific-purpose ui test path for `test_valid` self-test)
- #134426 (Fix typo in uint_macros.rs)
Failed merges:
- #133103 (Pass FnAbi to find_mir_or_eval_fn)
r? `@ghost`
`@rustbot` modify labels: rollup
Before, cg_cranelift would ICE when trying to lower f16 and f128. The
library/ crates had all the infrastructure to omit using them, it just
wasn't hooked up to bootstrap.
Currently there are two ways to peek at a `TokenStreamIter`.
- Wrap it in a `Peekable` and use that traits `peek` method.
- Use `TokenStreamIter`'s inherent `peek` method.
Some code uses one, some use the other. This commit converts all places
to the inherent method. This eliminates mixing of `TokenStreamIter` and
`Peekable<TokenStreamIter>` and some use of `impl Iterator` and `dyn
Iterator`.
Because `TokenStreamIter` is a much better name for a `TokenStream`
iterator. Also rename the `TokenStream::trees` method as
`TokenStream::iter`, and some local variables.
As it happens, lookahead values of 0, 1, and 2 all work fine here, due
to the structure of the code. (Values or 3 or greater cause test
failures.) This commit changes the lookahead to zero because that will
facilitate cleanups in subsequent commits.
Field init shorthand allows writing initializers like `tcx: tcx` as
`tcx`. The compiler already uses it extensively. Fix the last few places
where it isn't yet used.
bootstrap: use specific-purpose ui test path for `test_valid` self-test
I wanted to move some ui tests around in #134418, which broke `test_valid` since it was referencing two non-specific-purpose ui tests. This PR instead adds two dummy tests under `tests/ui/bootstrap/self-test/`, for that purpose specifically.
r? bootstrap
An octuple of polonius fact generation cleanups
This PR is extracted from https://github.com/rust-lang/rust/pull/134268 for easier review and contains its first 8 commits. They have already been reviewed by ````@jackh726```` over there.
r? ````@jackh726````
coverage: Dismantle `map_data.rs` by moving its responsibilities elsewhere
This is a series of incremental changes that combine to let us get rid of `coverageinfo/map_data.rs`, by moving all of its responsibilities into more appropriate places.
Some of the notable consequences are:
- We once again build the per-CGU file table on the fly while preparing individual covfun records, instead of building the whole table up-front. The up-front approach was introduced by #117042 to work around various other problems in generating the covmap/covfun records, but subsequent cleanups have made that approach no longer necessary.
- Expression conversion and mapping-region conversion are now performed directly in `mapgen::covfun`, which should make future changes easier.
- We no longer insert unused function instances into the same map that is also used to track used function instances. This helps to decouple the handling of used vs unused functions.
---
There should be no meaningful change to compiler output. The file table is no longer sorted, because reordering it would invalidate the file indices stored in individual covfun records, but the table order should still be deterministic (albeit arbitrary).
There are some subsequent cleanups that I intend to investigate, but this is enough change for one PR.
Promote powerpc64le-unknown-linux-musl to tier 2 with host tools
MCP: https://github.com/rust-lang/compiler-team/issues/803
I'm using crosstool-ng for building a toolchain because GCC 9 from `musl-toolchain.sh` has float ABI issues (?) and can't compile LLVM, and writing a crosstool-ng config for a target feels less hacky than yet another target specific shell script. I also defined a kernel version, since there wasn't one specified before. If a lower version is desired, just let me know. I also tried to match the rust configure args with the loongarch64 musl tier 2 target.
The resulting compiler works fine, built with `DEPLOY=1 ./src/ci/docker/run.sh dist-powerpc64le-linux` and tested on Alpine Linux in a VM and on a bare metal POWER8 machine:
```
qemu-ppc64le:/tmp/rust-nightly-powerpc64le-unknown-linux-musl$ ash install.sh
install: creating uninstall script at /usr/local/lib/rustlib/uninstall.sh
install: installing component 'rustc'
install: installing component 'rust-std-powerpc64le-unknown-linux-musl'
install: installing component 'cargo'
install: installing component 'rustfmt-preview'
install: installing component 'rls-preview'
install: installing component 'rust-analyzer-preview'
install: installing component 'llvm-tools-preview'
install: installing component 'clippy-preview'
install: installing component 'miri-preview'
install: installing component 'rust-analysis-powerpc64le-unknown-linux-musl'
install: installing component 'llvm-bitcode-linker-preview'
install: WARNING: failed to run ldconfig. this may happen when not installing as root. run with --verbose to see the error
rust installed.
qemu-ppc64le:~$ echo 'fn main() { println!("hello world"); }' > test.rs
qemu-ppc64le:~$ rustc test.rs
qemu-ppc64le:~$ ./test
hello world
qemu-ppc64le:~$ file test
test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, OpenPOWER ELF V2 ABI, version 1 (SYSV), statically linked, BuildID[sha1]=596ee6abf9add487ebc54fb71c2076fb6faea013, with debug_info, not stripped
```
try-job: dist-powerpc64le-linux
Split up attribute parsing code and move data types to `rustc_attr_data_structures`
This change renames `rustc_attr` to `rustc_attr_parsing`, and splits up the parsing code. At the same time, all the data types used move to `rustc_attr_data_structures`. This is in preparation of also having a third crate: `rustc_attr_validation`
I initially envisioned this as two separate PRs, but I think doing it in one go reduces the number of ways others would have to rebase their changes on this. However, I can still split them.
r? `@oli-obk` (we already discussed how this is a first step in a larger plan)
For a more detailed plan on how attributes are going to change, see https://github.com/rust-lang/rust/issues/131229
Edit: this looks like a giant PR, but the changes are actually rather trivial. Each commit is reviewable on its own, and mostly moves code around. No new logic is added.
- Move `tests/ui/attrs-resolution.rs` to `tests/ui/resolve/`.
- Document test intent.
- Rename test to `non-macro-attrs-accepted.rs` to better reflect test
intent.
- Move `tests/ui/attrs-resolution-errors.rs` to `tests/ui/resolve/`.
- Document test intent.
- Rename test to `attr-macros-positional-rejection.rs` to better reflect
test intent.
- Move `tests/ui/attr-usage-inline.rs` to `tests/ui/attributes/inline/`.
- Briefly document test intent.
- Drop unnecessary `#[allow(dead_code)]` as this is allowed-by-default
for ui test suite.
