improvements on initial sysroot and libdir finding logics
Stabilized initial sysroot and libdir path resolution logic to work without dry-run conditions and utilized initial sysroot more broadly.
Remove `HybridBitSet`
`HybridBitSet` was introduced under the name `HybridIdxSetBuf` way back in #53383 where it was a big win for NLL borrow checker performance. In #93984 the more flexible `ChunkedBitSet` was added. Uses of `HybridBitSet` have gradually disappeared (e.g. #116152) and there are now few enough that they can be replaced with `BitSet` or `ChunkedBitSet`, and `HybridBitSet` can be removed, cutting more than 700 lines of code.
r? `@Mark-Simulacrum`
As part of the larger goal of reducing `HybridBitSet` use in general.
This code is for debugging only and isn't performance sensitive, so
`ChunkedBitSet` should be fine.
The current implementation is slow because it does an operation for
every bit in the set, even zero bits. So if you have a large bitset with
many zero bits (which is common) it's very slow.
This commit improves the iterator to skip over `Zeros` chunks in a
single step, and uses the fast `BitIter` for `Mixed` chunks. It also
removes the existing `fold` implementation, which was only there because
the old iterator was slow.
- Fix a typo in a comment.
- Remove unnecessary `Chunk::` qualifiers.
- Rename `ChunkedBitIter::bitset` as `ChunkedBitIter::bit_set`, because
`bit_set` is the form used everywhere else.
- Avoid some unnecessary local variables.
`ChunkedBitSet::is_empty` currently does an unnecessary check. This
commit removes that check and adds clarifying comments and an assertion
that demonstrate why it's unnecessary.
Revert #133418 (Store coverage source regions as `Span`) due to regression #133606
This reverts commit adf9b5fcd1, reversing changes made to af1ca153d4.
Reverting #133418 due to regressions reported at #133606.
r? jieyouxu
ensure JSON-defined targets are consistent
We have a `check_consistency` check that ensures some invariants which (presumably) the rest of the compiler relies on. However, JSON targets can easily be written in a way that violates those invariants. So this PR applies the same consistency check to JSON targets that we already enforce for built-in targets.
I have converted many of the assertions in that function to new macros that show a nice error instead of a panic; if people are okay with the general approach here, I can do that for the rest of the checks as well.
Enable -Zshare-generics for inline(never) functions
This avoids inlining cross-crate generic items when possible that are
already marked inline(never), implying that the author is not intending
for the function to be inlined by callers. As such, having a local copy
may make it easier for LLVM to optimize but mostly just adds to binary
bloat and codegen time. In practice our benchmarks indicate this is
indeed a win for larger compilations, where the extra cost in dynamic
linking to these symbols is diminished compared to the advantages in
fewer copies that need optimizing in each binary.
It might also make sense it expand this with other heuristics (e.g.,
`#[cold]`) in the future, but this seems like a good starting point.
FWIW, I expect that doing cleanup in where we make the decision
what should/shouldn't be shared is also a good idea. Way too
much code needed to be tweaked to check this. But I'm hoping
to leave that for a follow-up PR rather than blocking this on it.
this is funny though! apparently tidy parsed `.gitignore`, but did not
recognize unignore lines (`!...`), so tidy was ignoring `rustc_mir_build`
this whole time (at least for some lints?).
this does two things:
1. allows making `build` a symlink (which is not considered a directory
by git, thus removal of trailing `/`).
2. removes the need to special case `rustc_mir_build/src/build`
(leading `/` makes git only ignore the `build` in the root)
I was surprised to find that running with `-Zparse-only` only parses the
crate root file. Other files aren't parsed because that happens later
during expansion.
This commit renames the option and updates the help message to make this
clearer.
Compiletest: add proc-macro header
This adds a `proc-macro` header to simplify using proc-macros, and to reduce boilerplate. This header works similar to the `aux-build` header where you pass a path for a proc-macro to be built.
This allows the `force-host`, `no-prefer-dynamic` headers, and `crate_type` attribute to be removed. Additionally it uses `--extern` like `aux_crate` (allows implicit `extern crate` in 2018) and `--extern proc_macro` (to place in the prelude in 2018).
~~This also includes a secondary change which defaults the edition of proc-macros to 2024. This further reduces boilerplate (removing `extern crate proc_macro;`), and allows using modern Rust syntax. I was a little on the fence including this. I personally prefer it, but I can imagine it might be confusing to others.~~ EDIT: Removed
Some tests were changed so that when there is a chain of dependencies A→B→C, that the `@ proc-macro` is placed in `B` instead of `A` so that the `--extern` flag works correctly (previously it depended on `-L` to find `C`). I think this is better to make the dependencies more explicit. None of these tests looked like the were actually testing this behavior.
There is one test that had an unexplained output change: `tests/ui/macros/same-sequence-span.rs`. I do not know why it changed, but it didn't look like it was particularly important. Perhaps there was a normalization issue?
This is currently not compatible with the rustdoc `build-aux-docs` header. It can probably be fixed, I'm just not feeling motivated to do that right now.
### Implementation steps
- [x] Document this new behavior in rustc-dev-guide once we figure out the specifics. https://github.com/rust-lang/rustc-dev-guide/pull/2149
This reduces code sizes and better respects programmer intent when
marking inline(never). Previously such a marking was essentially ignored
for generic functions, as we'd still inline them in remote crates.
When we encounter an error caused by traits/types of different versions of the same crate, filter out the current crate when collecting spans to add to the context so we don't call `extern_crate` on the `DefId` of the current crate, which is meaningless and ICEs.
Produced output with this filter:
```
error[E0277]: the trait bound `foo::Struct: Trait` is not satisfied
--> y.rs:13:19
|
13 | check_trait::<foo::Struct>();
| ^^^^^^^^^^^ the trait `Trait` is not implemented for `foo::Struct`
|
note: there are multiple different versions of crate `foo` in the dependency graph
--> y.rs:7:1
|
4 | extern crate foo;
| ----------------- one version of crate `foo` is used here, as a direct dependency of the current crate
5 |
6 | pub struct Struct;
| ----------------- this type implements the required trait
7 | pub trait Trait {}
| ^^^^^^^^^^^^^^^ this is the required trait
|
::: x.rs:4:1
|
4 | pub struct Struct;
| ----------------- this type doesn't implement the required trait
5 | pub trait Trait {}
| --------------- this is the found trait
= note: two types coming from two different versions of the same crate are different types even if they look the same
= help: you can use `cargo tree` to explore your dependency tree
note: required by a bound in `check_trait`
--> y.rs:10:19
|
10 | fn check_trait<T: Trait>() {}
| ^^^^^ required by this bound in `check_trait`
```
Fix#133563.
always create `DefId`s for anon consts
but don't use them anywhere, we intentionally don't encode them in the crate metadata.
best reviewed by disabling whitespace.
This pretty much reimplements #133285 while adding the tests of #133455. Fixes#133064
r? `@BoxyUwU` `@compiler-errors`
This commit adds the relevant registers to the list of clobbered regis-
ters (part of #93335). This follows the [ABI documentation] of AVR-GCC:
> The [...] call-clobbered general purpose registers (GPRs) are
> registers that might be destroyed (clobbered) by a function call.
>
> - **R18–R27, R30, R31**
>
> These GPRs are call clobbered. An ordinary function may use them
> without restoring the contents. [...]
>
> - **R0, T-Flag**
>
> The temporary register and the T-flag in SREG are also call-
> clobbered, but this knowledge is not exposed explicitly to the
> compiler (R0 is a fixed register).
Therefore this commit lists the aforementioned registers `r18–r27`,
`r30` and `r31` as clobbered registers. Since the `r0` register (listed
above as well) is not available in inline assembly at all (potentially
because the AVR-GCC considers it a fixed register causing the register
to never be used in register allocation and LLVM adopting this), there
is no need to list it in the clobber list (the `r0`-variant is not even
available). A comment was added to ensure, that the `r0` gets added to
the clobber-list once the register gets usable in inline ASM.
Since the SREG is normally considered clobbered anyways (unless the user
supplies the `preserve_flags`-option), there is no need to explicitly
list a bit in this register (which is not possible to list anyways).
Note, that this commit completely ignores the case of interrupts (that
are described in the ABI-specification), since every register touched in
an ISR need to be saved anyways.
[ABI documentation]: https://gcc.gnu.org/wiki/avr-gcc#Call-Used_Registers
Cargo's -Zbuild-std has recently started checking this field, which
causes it to fail to compile even though we have full support for the
standard library on these targets.
This is in honor of `@bors` who is no longer used in this repo. I've
been saving this poem for a special PR, but it just seems fitting to use
it now:
Bors the bot,
Handsome and strong!
Will you go with me,
To prom?
---
### The cat of this release is Abu nominated by @jdonszelmann :
<img height=700
src="https://github.com/user-attachments/assets/414f24a1-8bbf-4fed-bcbc-acc5ca6a1353"
alt="The cats of this Clippy release" />
Cats for the next release can be nominated in the comments :D
---
changelog: none
