pub use std::simd::StdFloat;
Syncs portable-simd up to commit rust-lang/portable-simd@03f6fbb21e,
Diff: 533f0fc81a...03f6fbb21e
This sync requires a little bit more legwork because it also introduces a trait into `std::simd`, so that it is no longer simply a reexport of `core::simd`. Out of simple-minded consistency and to allow more options, I replicated the pattern for the way `core::simd` is integrated in the first place, however this is not necessary if it doesn't acquire any interdependencies inside `std`: it could be a simple crate reexport. I just don't know yet if that will happen or not.
To summarize other misc changes:
- Shifts no longer panic, now wrap on too-large shifts (like `Simd` integers usually do!)
- mask16x32 will now be many i16s, not many i32s... 🙃
- `#[must_use]` is spread around generously
- Adjusts division, float min/max, and `Mask::{from,to}_array` internally to be faster
- Adds the much-requested `Simd::cast::<U>` function (equivalent to `simd.to_array().map(|lane| lane as U)`)
Make available the remaining float intrinsics that require runtime support
from a platform's libm, and thus cannot be included in a no-deps libcore,
by exposing them through a sealed trait, `std::simd::StdFloat`.
We might use the trait approach a bit more in the future, or maybe not.
Ideally, this trait doesn't stick around, even if so.
If we don't need to intermesh it with std, it can be used as a crate,
but currently that is somewhat uncertain.
Print a helpful message if unwinding aborts when it reaches a nounwind function
This is implemented by routing `TerminatorKind::Abort` back through the panic handler, but with a special flag in the `PanicInfo` which indicates that the panic handler should *not* attempt to unwind the stack and should instead abort immediately.
This is useful for the planned change in https://github.com/rust-lang/lang-team/issues/97 which would make `Drop` impls `nounwind` by default.
### Code
```rust
#![feature(c_unwind)]
fn panic() {
panic!()
}
extern "C" fn nounwind() {
panic();
}
fn main() {
nounwind();
}
```
### Before
```
$ ./test
thread 'main' panicked at 'explicit panic', test.rs:4:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
Illegal instruction (core dumped)
```
### After
```
$ ./test
thread 'main' panicked at 'explicit panic', test.rs:4:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
thread 'main' panicked at 'panic in a function that cannot unwind', test.rs:7:1
stack backtrace:
0: 0x556f8f86ec9b - <std::sys_common::backtrace::_print::DisplayBacktrace as core::fmt::Display>::fmt::hdccefe11a6ac4396
1: 0x556f8f88ac6c - core::fmt::write::he152b28c41466ebb
2: 0x556f8f85d6e2 - std::io::Write::write_fmt::h0c261480ab86f3d3
3: 0x556f8f8654fa - std::panicking::default_hook::{{closure}}::h5d7346f3ff7f6c1b
4: 0x556f8f86512b - std::panicking::default_hook::hd85803a1376cac7f
5: 0x556f8f865a91 - std::panicking::rust_panic_with_hook::h4dc1c5a3036257ac
6: 0x556f8f86f079 - std::panicking::begin_panic_handler::{{closure}}::hdda1d83c7a9d34d2
7: 0x556f8f86edc4 - std::sys_common::backtrace::__rust_end_short_backtrace::h5b70ed0cce71e95f
8: 0x556f8f865592 - rust_begin_unwind
9: 0x556f8f85a764 - core::panicking::panic_no_unwind::h2606ab3d78c87899
10: 0x556f8f85b910 - test::nounwind::hade6c7ee65050347
11: 0x556f8f85b936 - test::main::hdc6e02cb36343525
12: 0x556f8f85b7e3 - core::ops::function::FnOnce::call_once::h4d02663acfc7597f
13: 0x556f8f85b739 - std::sys_common::backtrace::__rust_begin_short_backtrace::h071d40135adb0101
14: 0x556f8f85c149 - std::rt::lang_start::{{closure}}::h70dbfbf38b685e93
15: 0x556f8f85c791 - std::rt::lang_start_internal::h798f1c0268d525aa
16: 0x556f8f85c131 - std::rt::lang_start::h476a7ee0a0bb663f
17: 0x556f8f85b963 - main
18: 0x7f64c0822b25 - __libc_start_main
19: 0x556f8f85ae8e - _start
20: 0x0 - <unknown>
thread panicked while panicking. aborting.
Aborted (core dumped)
```
Remove deprecated LLVM-style inline assembly
The `llvm_asm!` was deprecated back in #87590 1.56.0, with intention to remove
it once `asm!` was stabilized, which already happened in #91728 1.59.0. Now it
is time to remove `llvm_asm!` to avoid continued maintenance cost.
Closes#70173.
Closes#92794.
Closes#87612.
Closes#82065.
cc `@rust-lang/wg-inline-asm`
r? `@Amanieu`
This covers:
impl<T> MaybeUninit<T> {
pub unsafe fn assume_init_read(&self) -> T { ... }
pub unsafe fn assume_init_drop(&mut self) { ... }
}
It does not cover the const-ness of `write` under
`const_maybe_uninit_write` nor the const-ness of
`assume_init_read` (this commit adds
`const_maybe_uninit_assume_init_read` for that).
FCP: https://github.com/rust-lang/rust/issues/63567#issuecomment-958590287.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stabilize `iter::zip`
Hello all!
As the tracking issue (#83574) for `iter::zip` completed the final commenting period without any concerns being raised, I hereby submit this stabilization PR on the issue.
As the pull request that introduced the feature (#82917) states, the `iter::zip` function is a shorter way to zip two iterators. As it's generally a quality-of-life/ergonomic improvement, it has been integrated into the codebase without any trouble, and has been
used in many places across the rust compiler and standard library since March without any issues.
For more details, I would refer to `@cuviper's` original PR, or the [function's documentation](https://doc.rust-lang.org/std/iter/fn.zip.html).
Stabilize asm! and global_asm!
Tracking issue: #72016
It's been almost 2 years since the original [RFC](https://github.com/rust-lang/rfcs/pull/2850) was posted and we're finally ready to stabilize this feature!
The main changes in this PR are:
- Removing `asm!` and `global_asm!` from the prelude as per the decision in #87228.
- Stabilizing the `asm` and `global_asm` features.
- Removing the unstable book pages for `asm` and `global_asm`. The contents are moved to the [reference](https://github.com/rust-lang/reference/pull/1105) and [rust by example](https://github.com/rust-lang/rust-by-example/pull/1483).
- All links to these pages have been removed to satisfy the link checker. In a later PR these will be replaced with links to the reference or rust by example.
- Removing the automatic suggestion for using `llvm_asm!` instead of `asm!` if you're still using the old syntax, since it doesn't work anymore with `asm!` no longer being in the prelude. This only affects code that predates the old LLVM-style `asm!` being renamed to `llvm_asm!`.
- Updating `stdarch` and `compiler-builtins`.
- Updating all the tests.
r? `@joshtriplett`
They are also removed from the prelude as per the decision in
https://github.com/rust-lang/rust/issues/87228.
stdarch and compiler-builtins are updated to work with the new, stable
asm! and global_asm! macros.
Implement most of RFC 2930, providing the ReadBuf abstraction
This replaces the `Initializer` abstraction for permitting reading into uninitialized buffers, closing #42788.
This leaves several APIs described in the RFC out of scope for the initial implementation:
* read_buf_vectored
* `ReadBufs`
Closes#42788, by removing the relevant APIs.
std: Stabilize the `thread_local_const_init` feature
This commit is intended to follow the stabilization disposition of the
FCP that has now finished in #84223. This stabilizes the ability to flag
thread local initializers as `const` expressions which enables the macro
to generate more efficient code for accessing it, notably removing
runtime checks for initialization.
More information can also be found in #84223 as well as the tests where
the feature usage was removed in this PR.
Closes#84223
This commit is intended to follow the stabilization disposition of the
FCP that has now finished in #84223. This stabilizes the ability to flag
thread local initializers as `const` expressions which enables the macro
to generate more efficient code for accessing it, notably removing
runtime checks for initialization.
More information can also be found in #84223 as well as the tests where
the feature usage was removed in this PR.
Closes#84223
Stabilize `const_raw_ptr_deref` for `*const T`
This stabilizes dereferencing immutable raw pointers in const contexts.
It does not stabilize `*mut T` dereferencing. This is behind the
same feature gate as mutable references.
closes https://github.com/rust-lang/rust/issues/51911
pub use core::simd;
A portable abstraction over SIMD has been a major pursuit in recent years for several programming languages. In Rust, `std::arch` offers explicit SIMD acceleration via compiler intrinsics, but it does so at the cost of having to individually maintain each and every single such API, and is almost completely `unsafe` to use. `core::simd` offers safe abstractions that are resolved to the appropriate SIMD instructions by LLVM during compilation, including scalar instructions if that is all that is available.
`core::simd` is enabled by the `#![portable_simd]` nightly feature tracked in https://github.com/rust-lang/rust/issues/86656 and is introduced here by pulling in the https://github.com/rust-lang/portable-simd repository as a subtree. We built the repository out-of-tree to allow faster compilation and a stochastic test suite backed by the proptest crate to verify that different targets, features, and optimizations produce the same result, so that using this library does not introduce any surprises. As these tests are technically non-deterministic, and thus can introduce overly interesting Heisenbugs if included in the rustc CI, they are visible in the commit history of the subtree but do nothing here. Some tests **are** introduced via the documentation, but these use deterministic asserts.
There are multiple unsolved problems with the library at the current moment, including a want for better documentation, technical issues with LLVM scalarizing and lowering to libm, room for improvement for the APIs, and so far I have not added the necessary plumbing for allowing the more experimental or libm-dependent APIs to be used. However, I thought it would be prudent to open this for review in its current condition, as it is both usable and it is likely I am going to learn something else needs to be fixed when bors tries this out.
The major types are
- `core::simd::Simd<T, N>`
- `core::simd::Mask<T, N>`
There is also the `LaneCount` struct, which, together with the SimdElement and SupportedLaneCount traits, limit the implementation's maximum support to vectors we know will actually compile and provide supporting logic for bitmasks. I'm hoping to simplify at least some of these out of the way as the compiler and library evolve.
This enables programmers to use a safe alternative to the current
`extern "platform-intrinsics"` API for writing portable SIMD code.
This is `#![feature(portable_simd)]` as tracked in #86656
This stabilizes dereferencing immutable raw pointers in const contexts.
It does not stabilize `*mut T` dereferencing. This is placed behind the
`const_raw_mut_ptr_deref` feature gate.
Clean up special function const checks
Mark them as const and `#[rustc_do_not_const_check]` instead of hard-coding them in const-eval checks.
r? `@oli-obk`
`@rustbot` label A-const-eval T-compiler
Stabilize feature `saturating_div` for rust 1.58.0
The tracking issue is #89381
This seems like a reasonable simple change(?). The feature `saturating_div` was added as part of the ongoing effort to implement a `Saturating` integer type (see #87921). The implementation has been discussed [here](https://github.com/rust-lang/rust/pull/87921#issuecomment-899357720) and [here](https://github.com/rust-lang/rust/pull/87921#discussion_r691888556). It extends the list of saturating operations on integer types (like `saturating_add`, `saturating_sub`, `saturating_mul`, ...) by the function `fn saturating_div(self, rhs: Self) -> Self`.
The stabilization of the feature `saturating_int_impl` (for the `Saturating` type) needs to have this stabilized first.
Closes#89381
Make cfg imply doc(cfg)
This is a reopening of #79341, rebased and modified a bit (we made a lot of refactoring in rustdoc's types so they needed to be reflected in this PR as well):
* `hidden_cfg` is now in the `Cache` instead of `DocContext` because `cfg` information isn't stored anymore on `clean::Attributes` type but instead computed on-demand, so we need this information in later parts of rustdoc.
* I removed the `bool_to_options` feature (which makes the code a bit simpler to read for `SingleExt` trait implementation.
* I updated the version for the feature.
There is only one thing I couldn't figure out: [this comment](https://github.com/rust-lang/rust/pull/79341#discussion_r561855624)
> I think I'll likely scrap the whole `SingleExt` extension trait as the diagnostics for 0 and >1 items should be different.
How/why should they differ?
EDIT: this part has been solved, the current code was fine, just needed a little simplification.
cc `@Nemo157`
r? `@jyn514`
Original PR description:
This is only active when the `doc_cfg` feature is active.
The implicit cfg can be overridden via `#[doc(cfg(...))]`, so e.g. to hide a `#[cfg]` you can use something like:
```rust
#[cfg(unix)]
#[doc(cfg(all()))]
pub struct Unix;
```
By adding `#![doc(cfg_hide(foobar))]` to the crate attributes the cfg `#[cfg(foobar)]` (and _only_ that _exact_ cfg) will not be implicitly treated as a `doc(cfg)` to render a message in the documentation.
Restructure std::rt
These changes should reduce binary size slightly while at the same slightly improving performance of startup, thread spawning and `std:🧵:current()`. I haven't verified if the compiler is able to optimize some of these cases already, but at least for some others the compiler is unable to do these optimizations as they slightly change behavior in cases where program startup would crash anyway by omitting a backtrace and panic location.
I can remove 6f6bb16 if preferred.
fix potential race in AtomicU64 time monotonizer
The AtomicU64-based monotonizer introduced in #83093 is incorrect because several threads could try to update the value concurrently and a thread which doesn't have the newest value among all the updates could win.
That bug probably has little real world impact since it doesn't make observed time worse than hardware clocks. The worst case would probably be a thread which has a clock that is behind by several cycles observing several inconsistent fixups, which should be similar to observing the unfiltered backslide in the first place.
New benchmarks, they don't look as good as the original PR but still an improvement compared to the mutex.
I don't know why the contended mutex case is faster now than in the previous benchmarks.
```
actually_monotonic() == true:
test time::tests::instant_contention_01_threads ... bench: 44 ns/iter (+/- 0)
test time::tests::instant_contention_02_threads ... bench: 45 ns/iter (+/- 0)
test time::tests::instant_contention_04_threads ... bench: 45 ns/iter (+/- 0)
test time::tests::instant_contention_08_threads ... bench: 45 ns/iter (+/- 0)
test time::tests::instant_contention_16_threads ... bench: 46 ns/iter (+/- 0)
atomic u64:
test time::tests::instant_contention_01_threads ... bench: 66 ns/iter (+/- 0)
test time::tests::instant_contention_02_threads ... bench: 287 ns/iter (+/- 14)
test time::tests::instant_contention_04_threads ... bench: 296 ns/iter (+/- 43)
test time::tests::instant_contention_08_threads ... bench: 604 ns/iter (+/- 163)
test time::tests::instant_contention_16_threads ... bench: 1,147 ns/iter (+/- 29)
mutex:
test time::tests::instant_contention_01_threads ... bench: 78 ns/iter (+/- 0)
test time::tests::instant_contention_02_threads ... bench: 652 ns/iter (+/- 275)
test time::tests::instant_contention_04_threads ... bench: 900 ns/iter (+/- 32)
test time::tests::instant_contention_08_threads ... bench: 1,927 ns/iter (+/- 62)
test time::tests::instant_contention_16_threads ... bench: 3,748 ns/iter (+/- 146)
```
