Target modifiers (special marked options) are recorded in metainfo
Target modifiers (special marked options) are recorded in metainfo and compared to be equal in different linked crates.
PR for this RFC: https://github.com/rust-lang/rfcs/pull/3716
Option may be marked as `TARGET_MODIFIER`, example: `regparm: Option<u32> = (None, parse_opt_number, [TRACKED TARGET_MODIFIER]`.
If an TARGET_MODIFIER-marked option has non-default value, it will be recorded in crate metainfo as a `Vec<TargetModifier>`:
```
pub struct TargetModifier {
pub opt: OptionsTargetModifiers,
pub value_name: String,
}
```
OptionsTargetModifiers is a macro-generated enum.
Option value code (for comparison) is generated using `Debug` trait.
Error example:
```
error: mixing `-Zregparm` will cause an ABI mismatch in crate `incompatible_regparm`
--> $DIR/incompatible_regparm.rs:10:1
|
LL | #![crate_type = "lib"]
| ^
|
= help: the `-Zregparm` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: `-Zregparm=1` in this crate is incompatible with `-Zregparm=2` in dependency `wrong_regparm`
= help: set `-Zregparm=2` in this crate or `-Zregparm=1` in `wrong_regparm`
= help: if you are sure this will not cause problems, use `-Cunsafe-allow-abi-mismatch=regparm` to silence this error
error: aborting due to 1 previous error
```
`-Cunsafe-allow-abi-mismatch=regparm,reg-struct-return` to disable list of flags.
Autodiff Upstreaming - rustc_codegen_ssa, rustc_middle
This PR should not be merged until the rustc_codegen_llvm part is merged.
I will also alter it a little based on what get's shaved off from the cg_llvm PR,
and address some of the feedback I received in the other PR (including cleanups).
I am putting it already up to
1) Discuss with `@jieyouxu` if there is more work needed to add tests to this and
2) Pray that there is someone reviewing who can tell me why some of my autodiff invocations get lost.
Re 1: My test require fat-lto. I also modify the compilation pipeline. So if there are any other llvm-ir tests in the same compilation unit then I will likely break them. Luckily there are two groups who currently have the same fat-lto requirement for their GPU code which I have for my autodiff code and both groups have some plans to enable support for thin-lto. Once either that work pans out, I'll copy it over for this feature. I will also work on not changing the optimization pipeline for functions not differentiated, but that will require some thoughts and engineering, so I think it would be good to be able to run the autodiff tests isolated from the rest for now. Can you guide me here please?
For context, here are some of my tests in the samples folder: https://github.com/EnzymeAD/rustbook
Re 2: This is a pretty serious issue, since it effectively prevents publishing libraries making use of autodiff: https://github.com/EnzymeAD/rust/issues/173. For some reason my dummy code persists till the end, so the code which calls autodiff, deletes the dummy, and inserts the code to compute the derivative never gets executed. To me it looks like the rustc_autodiff attribute just get's dropped, but I don't know WHY? Any help would be super appreciated, as rustc queries look a bit voodoo to me.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
r? `@jieyouxu`
Fix deduplication mismatches in vtables leading to upcasting unsoundness
We currently have two cases where subtleties in supertraits can trigger disagreements in the vtable layout, e.g. leading to a different vtable layout being accessed at a callsite compared to what was prepared during unsizing. Namely:
### #135315
In this example, we were not normalizing supertraits when preparing vtables. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Identity {
type Selff;
}
impl<Selff> Identity for Selff {
type Selff = Selff;
}
trait Middle<T>: Supertrait<()> + Supertrait<T> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T> Middle<T> for () {}
trait Trait: Middle<<() as Identity>::Selff> {}
impl Trait for () {}
fn main() {
(&() as &dyn Trait as &dyn Middle<()>).say_hello(&0);
}
```
When we prepare `dyn Trait`, we see a supertrait of `Middle<<() as Identity>::Selff>`, which itself has two supertraits `Supertrait<()>` and `Supertrait<<() as Identity>::Selff>`. These two supertraits are identical, but they are not duplicated because we were using structural equality and *not* considering normalization. This leads to a vtable layout with two trait pointers.
When we upcast to `dyn Middle<()>`, those two supertraits are now the same, leading to a vtable layout with only one trait pointer. This leads to an offset error, and we call the wrong method.
### #135316
This one is a bit more interesting, and is the bulk of the changes in this PR. It's a bit similar, except it uses binder equality instead of normalization to make the compiler get confused about two vtable layouts. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Trait<T, U>: Supertrait<T> + Supertrait<U> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T, U> Trait<T, U> for () {}
fn main() {
(&() as &'static dyn for<'a> Trait<&'static (), &'a ()>
as &'static dyn Trait<&'static (), &'static ()>)
.say_hello(&0);
}
```
When we prepare the vtable for `dyn for<'a> Trait<&'static (), &'a ()>`, we currently consider the PolyTraitRef of the vtable as the key for a supertrait. This leads two two supertraits -- `Supertrait<&'static ()>` and `for<'a> Supertrait<&'a ()>`.
However, we can upcast[^up] without offsetting the vtable from `dyn for<'a> Trait<&'static (), &'a ()>` to `dyn Trait<&'static (), &'static ()>`. This is just instantiating the principal trait ref for a specific `'a = 'static`. However, when considering those supertraits, we now have only one distinct supertrait -- `Supertrait<&'static ()>` (which is deduplicated since there are two supertraits with the same substitutions). This leads to similar offsetting issues, leading to the wrong method being called.
[^up]: I say upcast but this is a cast that is allowed on stable, since it's not changing the vtable at all, just instantiating the binder of the principal trait ref for some lifetime.
The solution here is to recognize that a vtable isn't really meaningfully higher ranked, and to just treat a vtable as corresponding to a `TraitRef` so we can do this deduplication more faithfully. That is to say, the vtable for `dyn for<'a> Tr<'a>` and `dyn Tr<'x>` are always identical, since they both would correspond to a set of free regions on an impl... Do note that `Tr<for<'a> fn(&'a ())>` and `Tr<fn(&'static ())>` are still distinct.
----
There's a bit more that can be cleaned up. In codegen, we can stop using `PolyExistentialTraitRef` basically everywhere. We can also fix SMIR to stop storing `PolyExistentialTraitRef` in its vtable allocations.
As for testing, it's difficult to actually turn this into something that can be tested with `rustc_dump_vtable`, since having multiple supertraits that are identical is a recipe for ambiguity errors. Maybe someone else is more creative with getting that attr to work, since the tests I added being run-pass tests is a bit unsatisfying. Miri also doesn't help here, since it doesn't really generate vtables that are offset by an index in the same way as codegen.
r? `@lcnr` for the vibe check? Or reassign, idk. Maybe let's talk about whether this makes sense.
<sup>(I guess an alternative would also be to not do any deduplication of vtable supertraits (or only a really conservative subset) rather than trying to normalize and deduplicate more faithfully here. Not sure if that works and is sufficient tho.)</sup>
cc `@steffahn` -- ty for the minimizations
cc `@WaffleLapkin` -- since you're overseeing the feature stabilization :3
Fixes#135315Fixes#135316
add `-Zmin-function-alignment`
tracking issue: https://github.com/rust-lang/rust/issues/82232
This PR adds the `-Zmin-function-alignment=<align>` flag, that specifies a minimum alignment for all* functions.
### Motivation
This feature is requested by RfL [here](https://github.com/rust-lang/rust/issues/128830):
> i.e. the equivalents of `-fmin-function-alignment` ([GCC](https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-fmin-function-alignment_003dn), Clang does not support it) / `-falign-functions` ([GCC](https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-falign-functions), [Clang](https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang1-falign-functions)).
>
> For the Linux kernel, the behavior wanted is that of GCC's `-fmin-function-alignment` and Clang's `-falign-functions`, i.e. align all functions, including cold functions.
>
> There is [`feature(fn_align)`](https://github.com/rust-lang/rust/issues/82232), but we need to do it globally.
### Behavior
The `fn_align` feature does not have an RFC. It was decided at the time that it would not be necessary, but maybe we feel differently about that now? In any case, here are the semantics of this flag:
- `-Zmin-function-alignment=<align>` specifies the minimum alignment of all* functions
- the `#[repr(align(<align>))]` attribute can be used to override the function alignment on a per-function basis: when `-Zmin-function-alignment` is specified, the attribute's value is only used when it is higher than the value passed to `-Zmin-function-alignment`.
- the target may decide to use a higher value (e.g. on x86_64 the minimum that LLVM generates is 16)
- The highest supported alignment in rust is `2^29`: I checked a bunch of targets, and they all emit the `.p2align 29` directive for targets that align functions at all (some GPU stuff does not have function alignment).
*: Only with `build-std` would the minimum alignment also be applied to `std` functions.
---
cc `@ojeda`
r? `@workingjubilee` you were active on the tracking issue
mark deprecated option as deprecated in rustc_session to remove copypasta and small refactor
This marks deprecated options as deprecated via flag in options table in rustc_session, which removes copypasted deprecation text from rustc_driver_impl.
This also adds warning for deprecated `-C ar` option, which didn't emitted any warnings before.
Makes `inline_threshold` `[UNTRACKED]`, as it do nothing.
Adds few tests.
See individual commits.
inline_threshold mark deprecated
no-stack-check
print deprecation message for -Car too
inline_threshold deprecated and do nothing: make in untracked
make OptionDesc struct from tuple
We don't need `NonNull::as_ptr` debuginfo
In order to stop pessimizing the use of local variables in core, skip debug info for MIR temporaries in tiny (single-BB) functions.
For functions as simple as this -- `Pin::new`, etc -- nobody every actually wants debuginfo for them in the first place. They're more like intrinsics than real functions, and stepping over them is good.
Stop pessimizing the use of local variables in core by skipping debug info for MIR temporaries in tiny (single-BB) functions.
For functions as simple as this -- `Pin::new`, etc -- nobody every actually wants debuginfo for them in the first place. They're more like intrinsics than real functions, and stepping over them is good.
rust_for_linux: -Zreg-struct-return commandline flag for X86 (#116973)
Command line flag `-Zreg-struct-return` for X86 (32-bit) for rust-for-linux.
This flag enables the same behavior as the `abi_return_struct_as_int` target spec key.
- Tracking issue: https://github.com/rust-lang/rust/issues/116973
Remove `-Zshow-span`.
It's very old (added in #12087). It's strange, and it's not clear what its use cases are. It only works with the crate root file because it runs before expansion. I suspect it won't be missed.
r? `@estebank`
It's very old (added in #12087). It's strange, and it's not clear what
its use cases are. It only works with the crate root file because it
runs before expansion. I suspect it won't be missed.
I was surprised to find that running with `-Zparse-only` only parses the
crate root file. Other files aren't parsed because that happens later
during expansion.
This commit renames the option and updates the help message to make this
clearer.
Don't allow `-Zunstable-options` to take a value
Passing an explicit boolean value (`-Zunstable-options=on`, `off` etc.) sometimes appears to work, but actually puts the compiler into an unintended state where unstable _options_ are still forbidden, but unstable values of _some_ stable options are allowed.
This is a result of `-Zunstable-options` being checked in multiple different places, in slightly different ways. Fixing the checks in `config::nightly_options` to understand boolean values would be non-trivial, so for now it's easier to make things consistent by forbidding values in the `-Z` parser.
---
There were a few uses of this in tests, which happened to work because they were tests of unstable values.
Passing an explicit boolean value (`on`, `off` etc.) appears to work, but
actually puts the compiler into an unintended state where unstable _options_
are still forbidden, but unstable values of _some_ stable options are allowed.
rustc_codegen_llvm: Add a new 'pc' option to branch-protection
Add a new 'pc' option to -Z branch-protection for aarch64 that enables the use of PC as a diversifier in PAC branch protection code.
When the pauth-lr target feature is enabled in combination with -Z branch-protection=pac-ret,pc, the new 9.5-a instructions (pacibsppc, retaasppc, etc) will be generated.
make codegen help output more consistent
The output of `rustc -C help` generally has one option per line. There was one exception because of a (presumably) forgotten line continuation escape.
Add a new 'pc' option to -Z branch-protection for aarch64 that
enables the use of PC as a diversifier in PAC branch protection code.
When the pauth-lr target feature is enabled in combination
with -Z branch-protection=pac-ret,pc, the new 9.5-a instructions
(pacibsppc, retaasppc, etc) will be generated.
