Variants::Single: do not use invalid VariantIdx for uninhabited enums
~~Stacked on top of https://github.com/rust-lang/rust/pull/133681, only the last commit is new.~~
Currently, `Variants::Single` for an empty enum contains a `VariantIdx` of 0; looking that up in the enum variant list will ICE. That's quite confusing. So let's fix that by adding a new `Variants::Empty` case for types that have 0 variants.
try-job: i686-msvc
Point at lint name instead of whole attr for gated lints
```
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:10
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^
|
= note: the `test_unstable_lint` lint is unstable
= help: add `#![feature(test_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
note: the lint level is defined here
--> $DIR/warn-unknown-unstable-lint-inline.rs:3:9
|
LL | #![warn(unknown_lints)]
| ^^^^^^^^^^^^^
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:29
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^^^^
|
= note: the `another_unstable_lint` lint is unstable
= help: add `#![feature(another_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
```
This is particularly relevant when there are multiple lints in the same `warn` attribute. Pointing at the smaller span makes it clearer which one the warning is complaining about.
-Znext-solver: modify candidate preference rules
This implements the design proposed in the FCP in #132325 and matches the old solver behavior. I hope the inline comments are all sufficiently clear, I personally think this is a fairly clear improvement over the existing approach using `fn discard_impls_shadowed_by_env`. This fixes https://github.com/rust-lang/trait-system-refactor-initiative/issues/96.
This also fixes#133639 which encounters an ICE in negative coherence when evaluating the where-clause. Given the features required to trigger this ICE 🤷
r? ``@compiler-errors``
Stabilize `#[diagnostic::do_not_recommend]`
This PR seeks to stabilize the `#[diagnostic::do_not_recommend]`attribute.
This attribute was first proposed as `#[do_not_recommend`] attribute in RFC 2397 (https://github.com/rust-lang/rfcs/pull/2397). It gives the crate authors the ability to not suggest to the compiler to not show certain traits in its error messages.
With the presence of the `#[diagnostic]` tool attribute namespace it was decided to move the attribute there, as that lowers the amount of guarantees the compiler needs to give about the exact way this influences error messages. It turns the attribute into a hint which can be ignored. In addition to the original proposed functionality this attribute now also hides the marked trait in help messages ("This trait is implemented by: ").
The attribute does not accept any argument and can only be placed on trait implementations. If it is placed somewhere else a lint warning is emitted and the attribute is otherwise ignored. If an argument is detected a lint warning is emitted and the argument is ignored. This follows the rules outlined by the diagnostic namespace.
This attribute allows crates like diesel to improve their error messages drastically. The most common example here is the following error message:
```
error[E0277]: the trait bound `&str: Expression` is not satisfied
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:53:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `Expression` is not implemented for `&str`, which is required by `&str: AsExpression<Integer>`
|
= help: the following other types implement trait `Expression`:
Bound<T>
SelectInt
note: required for `&str` to implement `AsExpression<Integer>`
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:26:13
|
LL | impl<T, ST> AsExpression<ST> for T
| ^^^^^^^^^^^^^^^^ ^
LL | where
LL | T: Expression<SqlType = ST>,
| ------------------------ unsatisfied trait bound introduced here
```
By applying the new attribute to the wild card trait implementation of
`AsExpression` for `T: Expression` the error message becomes:
```
error[E0277]: the trait bound `&str: AsExpression<Integer>` is not satisfied
--> $DIR/as_expression.rs:55:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `AsExpression<Integer>` is not implemented for `&str`
|
= help: the trait `AsExpression<Text>` is implemented for `&str`
= help: for that trait implementation, expected `Text`, found `Integer`
```
which makes it much easier for users to understand that they are facing a type mismatch.
Other explored example usages include:
* This standard library error message: https://github.com/rust-lang/rust/pull/128008
* That bevy derived example:
e1f3068995/tests/ui/diagnostic_namespace/do_not_recommend/supress_suggestions_in_help.rs (No
more tuple pyramids)
Fixes#51992
r? ``@compiler-errors``
This PR also adds a few more tests, makes sure that all the tests are run for the old and new trait solver and adds a check that the attribute does not contain arguments.
```
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:10
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^
|
= note: the `test_unstable_lint` lint is unstable
= help: add `#![feature(test_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
note: the lint level is defined here
--> $DIR/warn-unknown-unstable-lint-inline.rs:3:9
|
LL | #![warn(unknown_lints)]
| ^^^^^^^^^^^^^
warning: unknown lint: `test_unstable_lint`
--> $DIR/warn-unknown-unstable-lint-inline.rs:4:29
|
LL | #![allow(test_unstable_lint, another_unstable_lint)]
| ^^^^^^^^^^^^^^^^^^^^^
|
= note: the `test_unstable_lint` lint is unstable
= help: add `#![feature(test_unstable_lint)]` to the crate attributes to enable
= note: this compiler was built on YYYY-MM-DD; consider upgrading it if it is out of date
note: the lint level is defined here
--> $DIR/warn-unknown-unstable-lint-inline.rs:3:9
|
LL | #![warn(unknown_lints)]
| ^^^^^^^^^^^^^
```
This is particularly relevant when there are multiple lints in the same `warn` attribute. Pointing at the smaller span makes it clearer which one the warning is complaining about.
Use field init shorthand where possible
Field init shorthand allows writing initializers like `tcx: tcx` as
`tcx`. The compiler already uses it extensively. Fix the last few places
where it isn't yet used.
EDIT: this PR also updates `rustfmt.toml` to set
`use_field_init_shorthand = true`.
Merge some patterns together
just something I noticed while browsing code. No change in functionality, deduplicates the 100% equal match arms by creating one big or pattern
Do not do if ! else, use unnegated cond and swap the branches instead
I'm tidying up my ergonomic ref counting PR and I'm going to make some small, simple and unrelated changes outside that PR, so the main PR sticks more straight to the point.
Clarify the match ergonomics 2024 migration lint's output
This makes a few changes:
- Rather than using the whole pattern as a span for the lint, this collects spans for each problematic default binding mode reset and labels them with why they're problems.
- The lint's suggestions are now verbose-styled, so that it's clear what's being suggested vs. what's problematic.
- The wording is now less technical, and the hard error version of this diagnostic now links to the same reference material as the lint (currently an unwritten page of the edition guide).
I'm not totally confident in the wording or formatting, so I'd appreciate feedback on that in particular. I tried to draw a connection with word choice between the labels and the suggestion, but it might be imprecise, unclear, or cluttered. If so, it might be worth making the labels more terse and adding notes that explain them, but that's harder to read in a way too.
cc ```@Nadrieril``` ```@Jules-Bertholet```
Closes#133854. For reference, the error from that issue becomes:
```
error: pattern uses features incompatible with edition 2024
--> $DIR/remove-me.rs:6:25
|
LL | map.iter().filter(|(&(_x, _y), &_c)| false);
| ^ ^ cannot implicitly match against multiple layers of reference
| |
| cannot implicitly match against multiple layers of reference
|
help: make the implied reference pattern explicit
|
LL | map.iter().filter(|&(&(_x, _y), &_c)| false);
| +
```
Overhaul keyword handling
The compiler's list of keywords has some problems.
- It contains several items that aren't keywords.
- The order isn't quite right in a couple of places.
- Some of the names of predicates relating to keywords are confusing.
- rustdoc and rustfmt have their own (incorrect) versions of the keyword list.
- `AllKeywords` is unnecessarily complex.
r? ```@jieyouxu```
`gen` is an edition-specific keyword used in unstable Rust, and so
belongs with `try` (as `is_unused_keyword_conditional` indicates).
Also, the cases in `is_unused_keyword_conditional` should be in
alphabetical order, to match the keyword list.
These changes don't affect the behaviour of any of the `Symbol::is_*`
functions.
`rustc_symbol` is the source of truth for keywords.
rustdoc has its own implicit definition of keywords, via the
`is_doc_keyword`. It (presumably) intends to include all keywords, but
it omits `yeet`.
rustfmt has its own explicit list of Rust keywords. It also (presumably)
intends to include all keywords, but it omits `await`, `builtin`, `gen`,
`macro_rules`, `raw`, `reuse`, `safe`, and `yeet`. Also, it does linear
searches through this list, which is inefficient.
This commit fixes all of the above problems by introducing a new
predicate `is_any_keyword` in rustc and using it in rustdoc and rustfmt.
It documents that it's not the right predicate in most cases.
This commit seeks to stabilize the `#[diagnostic::do_not_recommend]`
attribute.
This attribute was first proposed as `#[do_not_recommend`] attribute in
RFC 2397 (https://github.com/rust-lang/rfcs/pull/2397). It gives the
crate authors the ability to not suggest to the compiler to not show
certain traits in it's error messages. With the presence of the
`#[diagnostic]` tool attribute namespace it was decided to move the
attribute there, as that lowers the amount of guarantees the compiler
needs to give about the exact way this influences error messages. It
turns the attribute into a hint which can be ignored. In addition to the
original proposed functionality this attribute now also hides the marked
trait in help messages ("This trait is implemented by: ").
The attribute does not accept any argument and can only be placed on
trait implementations. If it is placed somewhere else a lint warning is
emitted and the attribute is otherwise ignored. If an argument is
detected a lint warning is emitted and the argument is ignored. This
follows the rules outlined by the diagnostic namespace.
This attribute allows crates like diesel to improve their error messages
drastically. The most common example here is the following error
message:
```
error[E0277]: the trait bound `&str: Expression` is not satisfied
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:53:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `Expression` is not implemented for `&str`, which is required by `&str: AsExpression<Integer>`
|
= help: the following other types implement trait `Expression`:
Bound<T>
SelectInt
note: required for `&str` to implement `AsExpression<Integer>`
--> /home/weiznich/Documents/rust/rust/tests/ui/diagnostic_namespace/do_not_recommend.rs:26:13
|
LL | impl<T, ST> AsExpression<ST> for T
| ^^^^^^^^^^^^^^^^ ^
LL | where
LL | T: Expression<SqlType = ST>,
| ------------------------ unsatisfied trait bound introduced here
```
By applying the new attribute to the wild card trait implementation of
`AsExpression` for `T: Expression` the error message becomes:
```
error[E0277]: the trait bound `&str: AsExpression<Integer>` is not satisfied
--> $DIR/as_expression.rs:55:15
|
LL | SelectInt.check("bar");
| ^^^^^ the trait `AsExpression<Integer>` is not implemented for `&str`
|
= help: the trait `AsExpression<Text>` is implemented for `&str`
= help: for that trait implementation, expected `Text`, found `Integer`
```
which makes it much easier for users to understand that they are facing
a type mismatch.
Other explored example usages included
* This standard library error message: https://github.com/rust-lang/rust/pull/128008
* That bevy derived example:
e1f3068995/tests/ui/diagnostic_namespace/do_not_recommend/supress_suggestions_in_help.rs (No
more tuple pyramids)
Fixes#51992
Re-export more `rustc_span::symbol` things from `rustc_span`.
`rustc_span::symbol` defines some things that are re-exported from `rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some closely related things such as `Ident` and `kw`. So you can do `use rustc_span::{Symbol, sym}` but you have to do `use rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`, and changes many `rustc_span::symbol::` qualifiers to `rustc_span::`. This is a 300+ net line of code reduction, mostly because many files with two `use rustc_span` items can be reduced to one.
r? `@jieyouxu`
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
- Move it to `rustc_parse`, which is the only crate that uses it. This
lets us remove all the `pub` markers from it.
- Change `next_ref` and `look_ahead` to `get` and `bump`, which work
better for the `rustc_parse` uses.
- This requires adding a `TokenStream::get` method, which is simple.
- In `TokenCursor`, we currently duplicate the
`DelimSpan`/`DelimSpacing`/`Delimiter` from the surrounding
`TokenTree::Delimited` in the stack. This isn't necessary so long as
we don't prematurely move past the `Delimited`, and is a small perf
win on a very hot code path.
- In `parse_token_tree`, we clone the relevant `TokenTree::Delimited`
instead of constructing an identical one from pieces.
Rollup of 7 pull requests
Successful merges:
- #133265 (Add a range argument to vec.extract_if)
- #133801 (Promote powerpc64le-unknown-linux-musl to tier 2 with host tools)
- #134323 (coverage: Dismantle `map_data.rs` by moving its responsibilities elsewhere)
- #134378 (An octuple of polonius fact generation cleanups)
- #134408 (Regression test for RPIT inheriting lifetime from projection)
- #134423 (bootstrap: use specific-purpose ui test path for `test_valid` self-test)
- #134426 (Fix typo in uint_macros.rs)
Failed merges:
- #133103 (Pass FnAbi to find_mir_or_eval_fn)
r? `@ghost`
`@rustbot` modify labels: rollup
Currently there are two ways to peek at a `TokenStreamIter`.
- Wrap it in a `Peekable` and use that traits `peek` method.
- Use `TokenStreamIter`'s inherent `peek` method.
Some code uses one, some use the other. This commit converts all places
to the inherent method. This eliminates mixing of `TokenStreamIter` and
`Peekable<TokenStreamIter>` and some use of `impl Iterator` and `dyn
Iterator`.
Because `TokenStreamIter` is a much better name for a `TokenStream`
iterator. Also rename the `TokenStream::trees` method as
`TokenStream::iter`, and some local variables.
Field init shorthand allows writing initializers like `tcx: tcx` as
`tcx`. The compiler already uses it extensively. Fix the last few places
where it isn't yet used.
