Remove `token::{Open,Close}Delim`
By replacing them with `{Open,Close}{Param,Brace,Bracket,Invisible}`.
PR #137902 made `ast::TokenKind` more like `lexer::TokenKind` by
replacing the compound `BinOp{,Eq}(BinOpToken)` variants with fieldless
variants `Plus`, `Minus`, `Star`, etc. This commit does a similar thing
with delimiters. It also makes `ast::TokenKind` more similar to
`parser::TokenType`.
This requires a few new methods:
- `TokenKind::is_{,open_,close_}delim()` replace various kinds of
pattern matches.
- `Delimiter::as_{open,close}_token_kind` are used to convert
`Delimiter` values to `TokenKind`.
Despite these additions, it's a net reduction in lines of code. This is
because e.g. `token::OpenParen` is so much shorter than
`token::OpenDelim(Delimiter::Parenthesis)` that many multi-line forms
reduce to single line forms. And many places where the number of lines
doesn't change are still easier to read, just because the names are
shorter, e.g.:
```
- } else if self.token != token::CloseDelim(Delimiter::Brace) {
+ } else if self.token != token::CloseBrace {
```
r? `@petrochenkov`
By replacing them with `{Open,Close}{Param,Brace,Bracket,Invisible}`.
PR #137902 made `ast::TokenKind` more like `lexer::TokenKind` by
replacing the compound `BinOp{,Eq}(BinOpToken)` variants with fieldless
variants `Plus`, `Minus`, `Star`, etc. This commit does a similar thing
with delimiters. It also makes `ast::TokenKind` more similar to
`parser::TokenType`.
This requires a few new methods:
- `TokenKind::is_{,open_,close_}delim()` replace various kinds of
pattern matches.
- `Delimiter::as_{open,close}_token_kind` are used to convert
`Delimiter` values to `TokenKind`.
Despite these additions, it's a net reduction in lines of code. This is
because e.g. `token::OpenParen` is so much shorter than
`token::OpenDelim(Delimiter::Parenthesis)` that many multi-line forms
reduce to single line forms. And many places where the number of lines
doesn't change are still easier to read, just because the names are
shorter, e.g.:
```
- } else if self.token != token::CloseDelim(Delimiter::Brace) {
+ } else if self.token != token::CloseBrace {
```
I'm removing empty identifiers everywhere, because in practice they
always mean "no identifier" rather than "empty identifier". (An empty
identifier is impossible.) It's better to use `Option` to mean "no
identifier" because you then can't forget about the "no identifier"
possibility.
Some specifics:
- When testing an attribute for a single name, the commit uses the
`has_name` method.
- When testing an attribute for multiple names, the commit uses the new
`has_any_name` method.
- When using `match` on an attribute, the match arms now have `Some` on
them.
In the tests, we now avoid printing empty identifiers by not printing
the identifier in the `error:` line at all, instead letting the carets
point out the problem.
It bugs me when variables of type `Ident` are called `name`. It leads to
silly things like `name.name`. `Ident` variables should be called
`ident`, and `name` should be used for variables of type `Symbol`.
This commit improves things by by doing `s/name/ident/` on a bunch of
`Ident` variables. Not all of them, but a decent chunk.
They are no longer needed.
This does slightly worsen the error message for a single test, but that
test contains code that is so badly broken that I'm not worried about
it.
Notes about tests:
- tests/ui/rfcs/rfc-2294-if-let-guard/feature-gate.rs: some messages are
now duplicated due to repeated parsing.
- tests/ui/rfcs/rfc-2497-if-let-chains/disallowed-positions.rs: ditto.
- `tests/ui/proc-macro/macro-rules-derive-cfg.rs`: the diff looks large
but the only difference is the insertion of a single
invisible-delimited group around a metavar.
- `tests/ui/attributes/nonterminal-expansion.rs`: a slight span
degradation, somehow related to the recent massive attr parsing
rewrite (#135726). I couldn't work out exactly what is going wrong,
but I don't think it's worth holding things up for a single slightly
suboptimal error message.
`ast::Item` has an `ident` field.
- It's always non-empty for these item kinds: `ExternCrate`, `Static`,
`Const`, `Fn`, `Mod`, `TyAlias`, `Enum`, `Struct`, `Union`,
`Trait`, `TraitAlias`, `MacroDef`, `Delegation`.
- It's always empty for these item kinds: `Use`, `ForeignMod`,
`GlobalAsm`, `Impl`, `MacCall`, `DelegationMac`.
There is a similar story for `AssocItemKind` and `ForeignItemKind`.
Some sites that handle items check for an empty ident, some don't. This
is a very C-like way of doing things, but this is Rust, we have sum
types, we can do this properly and never forget to check for the
exceptional case and never YOLO possibly empty identifiers (or possibly
dummy spans) around and hope that things will work out.
The commit is large but it's mostly obvious plumbing work. Some notable
things.
- `ast::Item` got 8 bytes bigger. This could be avoided by boxing the
fields within some of the `ast::ItemKind` variants (specifically:
`Struct`, `Union`, `Enum`). I might do that in a follow-up; this
commit is big enough already.
- For the visitors: `FnKind` no longer needs an `ident` field because
the `Fn` within how has one.
- In the parser, the `ItemInfo` typedef is no longer needed. It was used
in various places to return an `Ident` alongside an `ItemKind`, but
now the `Ident` (if present) is within the `ItemKind`.
- In a few places I renamed identifier variables called `name` (or
`foo_name`) as `ident` (or `foo_ident`), to better match the type, and
because `name` is normally used for `Symbol`s. It's confusing to see
something like `foo_name.name`.
expand: Leave traces when expanding `cfg` attributes
This is the same as https://github.com/rust-lang/rust/pull/138515, but for `cfg(true)` instead of `cfg_attr`.
The difference is that `cfg(true)`s already left "traces" after themselves - the `cfg` attributes themselves, with `expanded_inert_attrs` set to true, with full tokens, available to proc macros.
This is not a reasonably expected behavior, but it could not be removed without a replacement, because a [major rustdoc feature](https://github.com/rust-lang/rfcs/pull/3631) and a number of clippy lints rely on it. This PR implements a replacement.
This needs a crater run, because it changes observable behavior (in an intended way) - proc macros can no longer see expanded `cfg(true)` attributes.
(Some minor unnecessary special casing for `sym::cfg_attr` is also removed in this PR.)
r? `@nnethercote`
Mostly parser: Eliminate code that's been dead / semi-dead since the removal of type ascription syntax
**Disclaimer**: This PR is intended to mostly clean up code as opposed to bringing about behavioral changes. Therefore it doesn't aim to address any of the 'FIXME: remove after a month [dated: 2023-05-02]: "type ascription syntax has been removed, see issue [#]101728"'.
---
By commit:
1. Removes truly dead code:
* Since 1.71 (#109128) `let _ = { f: x };` is a syntax error as opposed to a semantic error which allows the parse-time diagnostic (suggestion) "*struct literal body without path // you might have forgotten […]*" to kick in.
* The analysis-time diagnostic (suggestion) from <=1.70 "*cannot find value \`f\` in this scope // you might have forgotten […]*" is therefore no longer reachable.
2. Updates `is_certainly_not_a_block` to be in line with the current grammar:
* The seq. `{ ident:` is definitely not the start of a block. Before the removal of ty ascr, `{ ident: ty_start` would begin a block expr.
* This shouldn't make more code compile IINM, it should *ultimately* only affect diagnostics.
* For example, `if T { f: () } {}` will now be interpreted as an `if` with struct lit `T { f: () }` as its *condition* (which is banned in the parser anyway) as opposed to just `T` (with the *consequent* being `f : ()` which is also invalid (since 1.71)). The diagnostics are almost the same because we have two separate parse recovery procedures + diagnostics: `StructLiteralNeedingParens` (*invalid struct lit*) before and `StructLiteralNotAllowedHere` (*struct lits aren't allowed here*) now, as you can see from the diff.
* (As an aside, even before this PR, fn `maybe_suggest_struct_literal` should've just used the much older & clearer `StructLiteralNotAllowedHere`)
* NB: This does sadly regress the compiler output for `tests/ui/parser/type-ascription-in-pattern.rs` but that can be fixed in follow-up PRs. It's not super important IMO and a natural consequence.
3. Removes code that's become dead due to the prior commit.
* Basically reverts #106620 + #112475 (without regressing rustc's output!).
* Now the older & more robust parse recovery procedure (cc `StructLiteralNotAllowedHere`) takes care of the cases the removed code used to handle.
* This automatically fixes the suggestions for \[[playground](https://play.rust-lang.org/?version=stable&mode=debug&edition=2024&gist=7e2030163b11ee96d17adc3325b01780)\]:
* `if Ty::<i32> { f: K }.m() {}`: `if Ty::<i32> { SomeStruct { f: K } }.m() {}` (broken) → ` if (Ty::<i32> { f: K }).m() {}`
* `if <T as Trait>::Out { f: K::<> }.m() {}`: `if <T as Trait>(::Out { f: K::<> }).m() {}` (broken) → `if (<T as Trait>::Out { f: K::<> }).m() {}`
4. Merge and simplify UI tests pertaining to this issue, so it's easier to add more regression tests like for the two cases mentioned above.
5. Merge UI tests and add the two regression tests.
Best reviewed commit by commit (on request I'll partially squash after approval).
expand: Leave traces when expanding `cfg_attr` attributes
Currently `cfg_trace` just disappears during expansion, but after this PR `#[cfg_attr(some tokens)]` will leave a `#[cfg_attr_trace(some tokens)]` attribute instead of itself in AST after expansion (the new attribute is built-in and inert, its inner tokens are the same as in the original attribute).
This trace attribute can then be used by lints or other diagnostics, #133823 has some examples.
Tokens in these trace attributes are set to an empty token stream, so the traces are non-existent for proc macros and cannot affect any user-observable behavior.
This is also a weakness, because if a proc macro processes some code with the trace attributes, they will be lost, so the traces are best effort rather than precise.
The next step is to do the same thing with `cfg` attributes (`#[cfg(TRUE)]` currently remains in both AST and tokens after expanding, it should be replaced with a trace instead).
The idea belongs to `@estebank.`
The idea is to identify cases of symbols/identifiers that are not
expected to be used. There isn't a perfectly sharp line between "dummy"
and "not dummy", but I think it's useful nonetheless.
Add `#[define_opaques]` attribute and require it for all type-alias-impl-trait sites that register a hidden type
Instead of relying on the signature of items to decide whether they are constraining an opaque type, the opaque types that the item constrains must be explicitly listed.
A previous version of this PR used an actual attribute, but had to keep the resolved `DefId`s in a side table.
Now we just lower to fields in the AST that have no surface syntax, instead a builtin attribute macro fills in those fields where applicable.
Note that for convenience referencing opaque types in associated types from associated methods on the same impl will not require an attribute. If that causes problems `#[defines()]` can be used to overwrite the default of searching for opaques in the signature.
One wart of this design is that closures and static items do not have generics. So since I stored the opaques in the generics of functions, consts and methods, I would need to add a custom field to closures and statics to track this information. During a T-types discussion we decided to just not do this for now.
fixes#131298
Revert <https://github.com/rust-lang/rust/pull/138084> to buy time to
consider options that avoids breaking downstream usages of cargo on
distributed `rustc-src` artifacts, where such cargo invocations fail due
to inability to inherit `lints` from workspace root manifest's
`workspace.lints` (this is only valid for the source rust-lang/rust
workspace, but not really the distributed `rustc-src` artifacts).
This breakage was reported in
<https://github.com/rust-lang/rust/issues/138304>.
This reverts commit 48caf81484, reversing
changes made to c6662879b2.
By naming them in `[workspace.lints.rust]` in the top-level
`Cargo.toml`, and then making all `compiler/` crates inherit them with
`[lints] workspace = true`. (I omitted `rustc_codegen_{cranelift,gcc}`,
because they're a bit different.)
The advantages of this over the current approach:
- It uses a standard Cargo feature, rather than special handling in
bootstrap. So, easier to understand, and less likely to get
accidentally broken in the future.
- It works for proc macro crates.
It's a shame it doesn't work for rustc-specific lints, as the comments
explain.
This involves replacing `nt_pretty_printing_compatibility_hack` with
`stream_pretty_printing_compatibility_hack`.
The handling of statements in `transcribe` is slightly different to
other nonterminal kinds, due to the lack of `from_ast` implementation
for empty statements.
Notable test changes:
- `tests/ui/proc-macro/expand-to-derive.rs`: the diff looks large but
the only difference is the insertion of a single invisible-delimited
group around a metavar.
Rollup of 12 pull requests
Successful merges:
- #135767 (Future incompatibility warning `unsupported_fn_ptr_calling_conventions`: Also warn in dependencies)
- #137852 (Remove layouting dead code for non-array SIMD types.)
- #137863 (Fix pretty printing of unsafe binders)
- #137882 (do not build additional stage on compiler paths)
- #137894 (Revert "store ScalarPair via memset when one side is undef and the other side can be memset")
- #137902 (Make `ast::TokenKind` more like `lexer::TokenKind`)
- #137921 (Subtree update of `rust-analyzer`)
- #137922 (A few cleanups after the removal of `cfg(not(parallel))`)
- #137939 (fix order on shl impl)
- #137946 (Fix docker run-local docs)
- #137955 (Always allow rustdoc-json tests to contain long lines)
- #137958 (triagebot.toml: Don't label `test/rustdoc-json` as A-rustdoc-search)
r? `@ghost`
`@rustbot` modify labels: rollup
For consistency with `rustc_lexer::TokenKind::Bang`, and because other
`ast::TokenKind` variants generally have syntactic names instead of
semantic names (e.g. `Star` and `DotDot` instead of `Mul` and `Range`).
`BinOpToken` is badly named, because it only covers the assignable
binary ops and excludes comparisons and `&&`/`||`. Its use in
`ast::TokenKind` does allow a small amount of code sharing, but it's a
clumsy factoring.
This commit removes `ast::TokenKind::BinOp{,Eq}`, replacing each one
with 10 individual variants. This makes `ast::TokenKind` more similar to
`rustc_lexer::TokenKind`, which has individual variants for all
operators.
Although the number of lines of code increases, the number of chars
decreases due to the frequent use of shorter names like `token::Plus`
instead of `token::BinOp(BinOpToken::Plus)`.
Note: there was an existing code path involving `Interpolated` in
`MetaItem::from_tokens` that was dead. This commit transfers that to the
new form, but puts an `unreachable!` call inside it.
The one notable test change is `tests/ui/macros/trace_faulty_macros.rs`.
This commit removes the complicated `Interpolated` handling in
`expected_expression_found` that results in a longer error message. But
I think the new, shorter message is actually an improvement.
The original complaint was in #71039, when the error message started
with "error: expected expression, found `1 + 1`". That was confusing
because `1 + 1` is an expression. Other than that, the reporter said
"the whole error message is not too bad if you ignore the first line".
Subsequently, extra complexity and wording was added to the error
message. But I don't think the extra wording actually helps all that
much. In particular, it still says of the `1+1` that "this is expected
to be expression". This repeats the problem from the original complaint!
This commit removes the extra complexity, reverting to a simpler error
message. This is primarily because the traversal is a pain without
`Interpolated` tokens. Nonetheless, I think the error message is
*improved*. It now starts with "expected expression, found `pat`
metavariable", which is much clearer and the real problem. It also
doesn't say anything specific about `1+1`, which is good, because the
`1+1` isn't really relevant to the error -- it's the `$e:pat` that's
important.
