Rollup merge of #111074 - WaffleLapkin:🌟unsizes_your_buf_reader🌟, r=Amanieu

Relax implicit `T: Sized` bounds on `BufReader<T>`, `BufWriter<T>` and `LineWriter<T>`

TL;DR:
```diff,rust
-pub struct BufReader<R> { /* ... */ }
+pub struct BufReader<R: ?Sized> { /* ... */ }

-pub struct BufWriter<W: Write> { /* ... */ }
+pub struct BufWriter<W: ?Sized + Write> { /* ... */ }

-pub struct LineWriter<W: Write> { /* ... */ }
+pub struct LineWriter<W: ?Sized + Write> { /* ... */ }
```

This allows using `&mut BufReader<dyn Read>`, for example.

**This is an insta-stable change**.

library/std/src/io/buffered/bufreader.rs

@@ -47,9 +47,9 @@ use buffer::Buffer;
 /// }
 /// ```
 #[stable(feature = "rust1", since = "1.0.0")]
-pub struct BufReader<R> {
+pub struct BufReader<R: ?Sized> {
-    inner: R,
     buf: Buffer,
+    inner: R,
 }
 
 impl<R: Read> BufReader<R> {
@@ -95,7 +95,7 @@ impl<R: Read> BufReader<R> {
     }
 }
 
-impl<R> BufReader<R> {
+impl<R: ?Sized> BufReader<R> {
     /// Gets a reference to the underlying reader.
     ///
     /// It is inadvisable to directly read from the underlying reader.
@@ -213,7 +213,10 @@ impl<R> BufReader<R> {
     /// }
     /// ```
     #[stable(feature = "rust1", since = "1.0.0")]
-    pub fn into_inner(self) -> R {
+    pub fn into_inner(self) -> R
+    where
+        R: Sized,
+    {
         self.inner
     }
 
@@ -226,13 +229,13 @@ impl<R> BufReader<R> {
 
 // This is only used by a test which asserts that the initialization-tracking is correct.
 #[cfg(test)]
-impl<R> BufReader<R> {
+impl<R: ?Sized> BufReader<R> {
     pub fn initialized(&self) -> usize {
         self.buf.initialized()
     }
 }
 
-impl<R: Seek> BufReader<R> {
+impl<R: ?Sized + Seek> BufReader<R> {
     /// Seeks relative to the current position. If the new position lies within the buffer,
     /// the buffer will not be flushed, allowing for more efficient seeks.
     /// This method does not return the location of the underlying reader, so the caller
@@ -257,7 +260,7 @@ impl<R: Seek> BufReader<R> {
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<R: Read> Read for BufReader<R> {
+impl<R: ?Sized + Read> Read for BufReader<R> {
     fn read(&mut self, buf: &mut [u8]) -> io::Result<usize> {
         // If we don't have any buffered data and we're doing a massive read
         // (larger than our internal buffer), bypass our internal buffer
@@ -371,7 +374,7 @@ impl<R: Read> Read for BufReader<R> {
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<R: Read> BufRead for BufReader<R> {
+impl<R: ?Sized + Read> BufRead for BufReader<R> {
     fn fill_buf(&mut self) -> io::Result<&[u8]> {
         self.buf.fill_buf(&mut self.inner)
     }
@@ -384,11 +387,11 @@ impl<R: Read> BufRead for BufReader<R> {
 #[stable(feature = "rust1", since = "1.0.0")]
 impl<R> fmt::Debug for BufReader<R>
 where
-    R: fmt::Debug,
+    R: ?Sized + fmt::Debug,
 {
     fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
         fmt.debug_struct("BufReader")
-            .field("reader", &self.inner)
+            .field("reader", &&self.inner)
             .field(
                 "buffer",
                 &format_args!("{}/{}", self.buf.filled() - self.buf.pos(), self.capacity()),
@@ -398,7 +401,7 @@ where
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<R: Seek> Seek for BufReader<R> {
+impl<R: ?Sized + Seek> Seek for BufReader<R> {
     /// Seek to an offset, in bytes, in the underlying reader.
     ///
     /// The position used for seeking with <code>[SeekFrom::Current]\(_)</code> is the
@@ -491,7 +494,7 @@ impl<R: Seek> Seek for BufReader<R> {
     }
 }
 
-impl<T> SizeHint for BufReader<T> {
+impl<T: ?Sized> SizeHint for BufReader<T> {
     #[inline]
     fn lower_bound(&self) -> usize {
         SizeHint::lower_bound(self.get_ref()) + self.buffer().len()

library/std/src/io/buffered/bufwriter.rs

@@ -67,8 +67,7 @@ use crate::ptr;
 /// [`TcpStream`]: crate::net::TcpStream
 /// [`flush`]: BufWriter::flush
 #[stable(feature = "rust1", since = "1.0.0")]
-pub struct BufWriter<W: Write> {
+pub struct BufWriter<W: ?Sized + Write> {
-    inner: W,
     // The buffer. Avoid using this like a normal `Vec` in common code paths.
     // That is, don't use `buf.push`, `buf.extend_from_slice`, or any other
     // methods that require bounds checking or the like. This makes an enormous
@@ -78,6 +77,7 @@ pub struct BufWriter<W: Write> {
     // write the buffered data a second time in BufWriter's destructor. This
     // flag tells the Drop impl if it should skip the flush.
     panicked: bool,
+    inner: W,
 }
 
 impl<W: Write> BufWriter<W> {
@@ -115,6 +115,69 @@ impl<W: Write> BufWriter<W> {
         BufWriter { inner, buf: Vec::with_capacity(capacity), panicked: false }
     }
 
+    /// Unwraps this `BufWriter<W>`, returning the underlying writer.
+    ///
+    /// The buffer is written out before returning the writer.
+    ///
+    /// # Errors
+    ///
+    /// An [`Err`] will be returned if an error occurs while flushing the buffer.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use std::io::BufWriter;
+    /// use std::net::TcpStream;
+    ///
+    /// let mut buffer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());
+    ///
+    /// // unwrap the TcpStream and flush the buffer
+    /// let stream = buffer.into_inner().unwrap();
+    /// ```
+    #[stable(feature = "rust1", since = "1.0.0")]
+    pub fn into_inner(mut self) -> Result<W, IntoInnerError<BufWriter<W>>> {
+        match self.flush_buf() {
+            Err(e) => Err(IntoInnerError::new(self, e)),
+            Ok(()) => Ok(self.into_parts().0),
+        }
+    }
+
+    /// Disassembles this `BufWriter<W>`, returning the underlying writer, and any buffered but
+    /// unwritten data.
+    ///
+    /// If the underlying writer panicked, it is not known what portion of the data was written.
+    /// In this case, we return `WriterPanicked` for the buffered data (from which the buffer
+    /// contents can still be recovered).
+    ///
+    /// `into_parts` makes no attempt to flush data and cannot fail.
+    ///
+    /// # Examples
+    ///
+    /// ```
+    /// use std::io::{BufWriter, Write};
+    ///
+    /// let mut buffer = [0u8; 10];
+    /// let mut stream = BufWriter::new(buffer.as_mut());
+    /// write!(stream, "too much data").unwrap();
+    /// stream.flush().expect_err("it doesn't fit");
+    /// let (recovered_writer, buffered_data) = stream.into_parts();
+    /// assert_eq!(recovered_writer.len(), 0);
+    /// assert_eq!(&buffered_data.unwrap(), b"ata");
+    /// ```
+    #[stable(feature = "bufwriter_into_parts", since = "1.56.0")]
+    pub fn into_parts(mut self) -> (W, Result<Vec<u8>, WriterPanicked>) {
+        let buf = mem::take(&mut self.buf);
+        let buf = if !self.panicked { Ok(buf) } else { Err(WriterPanicked { buf }) };
+
+        // SAFETY: forget(self) prevents double dropping inner
+        let inner = unsafe { ptr::read(&self.inner) };
+        mem::forget(self);
+
+        (inner, buf)
+    }
+}
+
+impl<W: ?Sized + Write> BufWriter<W> {
     /// Send data in our local buffer into the inner writer, looping as
     /// necessary until either it's all been sent or an error occurs.
     ///
@@ -284,67 +347,6 @@ impl<W: Write> BufWriter<W> {
         self.buf.capacity()
     }
 
-    /// Unwraps this `BufWriter<W>`, returning the underlying writer.
-    ///
-    /// The buffer is written out before returning the writer.
-    ///
-    /// # Errors
-    ///
-    /// An [`Err`] will be returned if an error occurs while flushing the buffer.
-    ///
-    /// # Examples
-    ///
-    /// ```no_run
-    /// use std::io::BufWriter;
-    /// use std::net::TcpStream;
-    ///
-    /// let mut buffer = BufWriter::new(TcpStream::connect("127.0.0.1:34254").unwrap());
-    ///
-    /// // unwrap the TcpStream and flush the buffer
-    /// let stream = buffer.into_inner().unwrap();
-    /// ```
-    #[stable(feature = "rust1", since = "1.0.0")]
-    pub fn into_inner(mut self) -> Result<W, IntoInnerError<BufWriter<W>>> {
-        match self.flush_buf() {
-            Err(e) => Err(IntoInnerError::new(self, e)),
-            Ok(()) => Ok(self.into_parts().0),
-        }
-    }
-
-    /// Disassembles this `BufWriter<W>`, returning the underlying writer, and any buffered but
-    /// unwritten data.
-    ///
-    /// If the underlying writer panicked, it is not known what portion of the data was written.
-    /// In this case, we return `WriterPanicked` for the buffered data (from which the buffer
-    /// contents can still be recovered).
-    ///
-    /// `into_parts` makes no attempt to flush data and cannot fail.
-    ///
-    /// # Examples
-    ///
-    /// ```
-    /// use std::io::{BufWriter, Write};
-    ///
-    /// let mut buffer = [0u8; 10];
-    /// let mut stream = BufWriter::new(buffer.as_mut());
-    /// write!(stream, "too much data").unwrap();
-    /// stream.flush().expect_err("it doesn't fit");
-    /// let (recovered_writer, buffered_data) = stream.into_parts();
-    /// assert_eq!(recovered_writer.len(), 0);
-    /// assert_eq!(&buffered_data.unwrap(), b"ata");
-    /// ```
-    #[stable(feature = "bufwriter_into_parts", since = "1.56.0")]
-    pub fn into_parts(mut self) -> (W, Result<Vec<u8>, WriterPanicked>) {
-        let buf = mem::take(&mut self.buf);
-        let buf = if !self.panicked { Ok(buf) } else { Err(WriterPanicked { buf }) };
-
-        // SAFETY: forget(self) prevents double dropping inner
-        let inner = unsafe { ptr::read(&self.inner) };
-        mem::forget(self);
-
-        (inner, buf)
-    }
-
     // Ensure this function does not get inlined into `write`, so that it
     // remains inlineable and its common path remains as short as possible.
     // If this function ends up being called frequently relative to `write`,
@@ -511,7 +513,7 @@ impl fmt::Debug for WriterPanicked {
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<W: Write> Write for BufWriter<W> {
+impl<W: ?Sized + Write> Write for BufWriter<W> {
     #[inline]
     fn write(&mut self, buf: &[u8]) -> io::Result<usize> {
         // Use < instead of <= to avoid a needless trip through the buffer in some cases.
@@ -640,20 +642,20 @@ impl<W: Write> Write for BufWriter<W> {
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<W: Write> fmt::Debug for BufWriter<W>
+impl<W: ?Sized + Write> fmt::Debug for BufWriter<W>
 where
     W: fmt::Debug,
 {
     fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
         fmt.debug_struct("BufWriter")
-            .field("writer", &self.inner)
+            .field("writer", &&self.inner)
             .field("buffer", &format_args!("{}/{}", self.buf.len(), self.buf.capacity()))
             .finish()
     }
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<W: Write + Seek> Seek for BufWriter<W> {
+impl<W: ?Sized + Write + Seek> Seek for BufWriter<W> {
     /// Seek to the offset, in bytes, in the underlying writer.
     ///
     /// Seeking always writes out the internal buffer before seeking.
@@ -664,7 +666,7 @@ impl<W: Write + Seek> Seek for BufWriter<W> {
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<W: Write> Drop for BufWriter<W> {
+impl<W: ?Sized + Write> Drop for BufWriter<W> {
     fn drop(&mut self) {
         if !self.panicked {
             // dtors should not panic, so we ignore a failed flush

library/std/src/io/buffered/linewriter.rs

@@ -64,7 +64,7 @@ use crate::io::{self, buffered::LineWriterShim, BufWriter, IntoInnerError, IoSli
 /// }
 /// ```
 #[stable(feature = "rust1", since = "1.0.0")]
-pub struct LineWriter<W: Write> {
+pub struct LineWriter<W: ?Sized + Write> {
     inner: BufWriter<W>,
 }
 
@@ -109,27 +109,6 @@ impl<W: Write> LineWriter<W> {
         LineWriter { inner: BufWriter::with_capacity(capacity, inner) }
     }
 
-    /// Gets a reference to the underlying writer.
-    ///
-    /// # Examples
-    ///
-    /// ```no_run
-    /// use std::fs::File;
-    /// use std::io::LineWriter;
-    ///
-    /// fn main() -> std::io::Result<()> {
-    ///     let file = File::create("poem.txt")?;
-    ///     let file = LineWriter::new(file);
-    ///
-    ///     let reference = file.get_ref();
-    ///     Ok(())
-    /// }
-    /// ```
-    #[stable(feature = "rust1", since = "1.0.0")]
-    pub fn get_ref(&self) -> &W {
-        self.inner.get_ref()
-    }
-
     /// Gets a mutable reference to the underlying writer.
     ///
     /// Caution must be taken when calling methods on the mutable reference
@@ -184,8 +163,31 @@ impl<W: Write> LineWriter<W> {
     }
 }
 
+impl<W: ?Sized + Write> LineWriter<W> {
+    /// Gets a reference to the underlying writer.
+    ///
+    /// # Examples
+    ///
+    /// ```no_run
+    /// use std::fs::File;
+    /// use std::io::LineWriter;
+    ///
+    /// fn main() -> std::io::Result<()> {
+    ///     let file = File::create("poem.txt")?;
+    ///     let file = LineWriter::new(file);
+    ///
+    ///     let reference = file.get_ref();
+    ///     Ok(())
+    /// }
+    /// ```
+    #[stable(feature = "rust1", since = "1.0.0")]
+    pub fn get_ref(&self) -> &W {
+        self.inner.get_ref()
+    }
+}
+
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<W: Write> Write for LineWriter<W> {
+impl<W: ?Sized + Write> Write for LineWriter<W> {
     fn write(&mut self, buf: &[u8]) -> io::Result<usize> {
         LineWriterShim::new(&mut self.inner).write(buf)
     }
@@ -216,7 +218,7 @@ impl<W: Write> Write for LineWriter<W> {
 }
 
 #[stable(feature = "rust1", since = "1.0.0")]
-impl<W: Write> fmt::Debug for LineWriter<W>
+impl<W: ?Sized + Write> fmt::Debug for LineWriter<W>
 where
     W: fmt::Debug,
 {

library/std/src/io/buffered/linewritershim.rs

@@ -11,11 +11,11 @@ use crate::sys_common::memchr;
 /// `BufWriters` to be temporarily given line-buffering logic; this is what
 /// enables Stdout to be alternately in line-buffered or block-buffered mode.
 #[derive(Debug)]
-pub struct LineWriterShim<'a, W: Write> {
+pub struct LineWriterShim<'a, W: ?Sized + Write> {
     buffer: &'a mut BufWriter<W>,
 }
 
-impl<'a, W: Write> LineWriterShim<'a, W> {
+impl<'a, W: ?Sized + Write> LineWriterShim<'a, W> {
     pub fn new(buffer: &'a mut BufWriter<W>) -> Self {
         Self { buffer }
     }
@@ -49,7 +49,7 @@ impl<'a, W: Write> LineWriterShim<'a, W> {
     }
 }
 
-impl<'a, W: Write> Write for LineWriterShim<'a, W> {
+impl<'a, W: ?Sized + Write> Write for LineWriterShim<'a, W> {
     /// Write some data into this BufReader with line buffering. This means
     /// that, if any newlines are present in the data, the data up to the last
     /// newline is sent directly to the underlying writer, and data after it

library/std/src/io/copy.rs

@@ -86,7 +86,7 @@ impl<W: Write + ?Sized> BufferedCopySpec for W {
     }
 }
 
-impl<I: Write> BufferedCopySpec for BufWriter<I> {
+impl<I: ?Sized + Write> BufferedCopySpec for BufWriter<I> {
     fn copy_to<R: Read + ?Sized>(reader: &mut R, writer: &mut Self) -> Result<u64> {
         if writer.capacity() < DEFAULT_BUF_SIZE {
             return stack_buffer_copy(reader, writer);

library/std/src/io/mod.rs

@@ -2754,7 +2754,7 @@ trait SizeHint {
     }
 }
 
-impl<T> SizeHint for T {
+impl<T: ?Sized> SizeHint for T {
     #[inline]
     default fn lower_bound(&self) -> usize {
         0

library/std/src/sys/unix/kernel_copy.rs

@@ -466,7 +466,7 @@ impl<T: CopyRead> CopyRead for Take<T> {
     }
 }
 
-impl<T: CopyRead> CopyRead for BufReader<T> {
+impl<T: ?Sized + CopyRead> CopyRead for BufReader<T> {
     fn drain_to<W: Write>(&mut self, writer: &mut W, outer_limit: u64) -> Result<u64> {
         let buf = self.buffer();
         let buf = &buf[0..min(buf.len(), outer_limit.try_into().unwrap_or(usize::MAX))];
@@ -495,7 +495,7 @@ impl<T: CopyRead> CopyRead for BufReader<T> {
     }
 }
 
-impl<T: CopyWrite> CopyWrite for BufWriter<T> {
+impl<T: ?Sized + CopyWrite> CopyWrite for BufWriter<T> {
     fn properties(&self) -> CopyParams {
         self.get_ref().properties()
     }